VIEN

Non-alloy steel, in bars and in irregularly wound coils, hot-rolled.

983910008-digit code

9839.10.00 — In bars and coils, of a circular cross-sectional diameter of less than 14 mm

Dạng thanh và cuộn, loại có đường kính mặt cắt ngang hình tròn dưới 14 mm

Unit: kg (kg)

HS code 98391000 covers in bars and coils, of a circular cross-sectional diameter of less than 14 mm under heading 9839 (non-alloy steel, in bars and in irregularly wound coils, hot-rolled.), Chapter 98. The MFN import duty is 0%; the lowest FTA rate is 0% under Vietnam - Laos (C/O form S required). Unit of quantity: kg.

MFN import duty

0%

Lowest FTA

0%

Vietnam - Laos

VAT

—

Excise / Env. tax

—

Not subject

Import duty comparison across FTA schedules

Full table with legal documents & effective dates
Tax / ScheduleRateDocumentEffective
Preferential import duty (MFN)0%26/2023/NĐ-CP15/07/2023
Ordinary import duty5%15/2023/QĐ-TTg15/07/2023
Vietnam - Laos0%206/2025/NĐ-CP15/07/2025

VAT · Excise tax · Environmental protection tax

No data.

Rules of origin by FTA

To claim an FTA rate the goods must meet the origin criterion below AND carry a valid C/O — the right HS code alone is not enough. Step-by-step self-check →

Agreements with no rule specific to this code

This code carries a preferential rate under the agreements below but has no line of its own in the product-specific rules annex. The goods must still meet an origin requirement.

VN_LAOC/O SGeneral rule applies

The agreement sets a general rule for codes outside the annex:

1. General origin criterion

a) Goods specified in Clause 2 of Article 2 shall be considered as originating in the Member State where the working or processing of those goods has taken place if:

- The goods have a regional value content (hereinafter referred to as the “Viet Nam - Laos value content” or the “regional value content (LVC)”) of not less than forty percent (40%), calculated in accordance with the formula provided in Article 5; or

- All non-originating materials used in the production of those goods have undergone a change in tariff classification (hereinafter referred to as “CTC”) at the four (4)-digit level (meaning a change of heading) of the Harmonized System.

b) Each Member State shall allow the exporter of the goods to decide to use either of the two criteria “LVC of not less than forty percent (40%)” or “change in tariff classification at the four (04)-digit level” referred to at point a of Clause 1 in order to determine the origin of the goods.

CTCLVC

Source: Circular No. 04/2010/TT-BCT · Article 4(1) of Appendix 1

Criteria are translated for reference; the Vietnamese wording quoted underneath is the binding text.

Notes for Chapter 98 — REGULATIONS ON COMMODITY CODES AND SPECIAL PREFERENTIAL IMPORT DUTY RATES FOR CERTAIN GROUPS OF GOODS AND GOODS

3. Danh mục hàng hóa và mức thuế suất thuế nhập khẩu ưu đãi

Goods previously classified under this code

5 notices from Vietnam Customs assigning code 98391000

  • Analysis result547/TB-KĐ306/09/2023General Department of Vietnam Customs

    Mục 1: Thép cuộn cán nóng dạng thanh que cuốn không đều, không hợp kim, không phù hợp làm que hàn và thép cốt bê tông. D=6.5mm.SAE 1008TC: ASTM A510 (TCVN 1766:1975 và TCVN

  • Analysis result550/TB-KĐ306/09/2023General Department of Vietnam Customs

    Mục 4: Thép cuộn cán nóng dạng thanh que cuốn không đều, không hợp kim, không phù hợp làm que hàn và thép cốt bê tông. D=l2mm.SAE 1008TC: ASTM A510 (TCVN 1766:1975 và TCVN

  • Analysis result549/TB-KĐ306/09/2023General Department of Vietnam Customs

    Mục 3: Thép cuộn cán nóng dạng thanh que cuốn không đều, không hợp kim, không phù hợp làm que hàn và thép cốt bê tông. D=l0mm.SAE 1008TC: ASTM A510 (TCVN 1766:1975 và TCVN

  • Analysis result548/TB-KĐ306/09/2023General Department of Vietnam Customs

    Mục 2: Thép cuộn cán nóng dạng thanh que cuốn không đều, không hợp kim, không phù hợp làm que hàn và thép cốt bê tông. D=§mm.SAE 1008,TC: ASTM A510 (TCVN 1766:1975 và TCVN 8996:2011)

  • Analysis result140/TB-KĐ324/03/2022Customs Verification Sub-Department 3

    Thép dây không hợp kim, dạng cuộn đã được cán nóng, đường kính: 5.5mm, tiêu chuẩn: ASWRCH§A, hàm lượng cacbon: 0.08% (mã hs code chuyển đổi 98391000). Hàng mới 100%

A ruling binds only the applicant that requested it; an analysis result binds only the consignment sampled. Neither is a general precedent — treat them as a reference for how Customs has reasoned about similar goods. Product names are read from scanned PDFs by OCR and may contain errors; open the original notice to check.

Codes at the same level under 9839

Check neighbouring codes to make sure the classification fits best.

Data updated: 11/08/2026 · Found wrong or missing data? Report a data error