Tariff schedule AKFTA (ASEAN - Korea) 2022-2027
Attached to Decree No. 119/2022/ND-CP
Download original (.docx)010203040506070809101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767879808182838485868788899091929394959697
Chapter 72 — Iron and steel
594 rows
| Commodity code | Description of goods | AKFTA rate (%) | Countries not eligible for preferential treatment | GIC |
|---|---|---|---|---|
| 2022 - 2027 | ||||
| Chapter 72 | ||||
| Iron and steel | ||||
| 72.01 | Pig iron and, spiegeleisen in pigs, blocks or other primary forms | |||
| 7201.10.00 | - Non-alloy pig iron containing by weight 0.5% or less of phosphorus | 0 | ||
| 7201.20.00 | - Non-alloy pig iron containing by weight more than 0.5% of phosphorus | 0 | ||
| 7201.50.00 | - Alloy pig iron; spiegeleisen | 0 | ||
| 72.02 | Ferro-alloys | |||
| - Ferro-manganese: | ||||
| 7202.11.00 | - - Containing by weight more than 2% of carbon | 0 | ||
| 7202.19.00 | - - Other | 0 | ||
| - Ferro-silicon: | ||||
| 7202.21.00 | - - Containing by weight more than 55% of silicon | 0 | ||
| 7202.29.00 | - - Other | 0 | ||
| 7202.30.00 | - Ferro-silico-manganese | 0 | ||
| - Ferro-chromium: | ||||
| 7202.41.00 | - - Containing by weight more than 4% of carbon | 0 | ||
| 7202.49.00 | - - Other | 0 | ||
| 7202.50.00 | - Ferro-silico-chromium | 0 | ||
| 7202.60.00 | - Ferro-nickel | 0 | ||
| 7202.70.00 | - Ferro-molybdenum | 0 | ||
| 7202.80.00 | - Ferro-tungsten and ferro-silico-tungsten | 0 | ||
| - Other: | ||||
| 7202.91.00 | - - Ferro-titanium and ferro-silico-titanium | 0 | ||
| 7202.92.00 | - - Ferro-vanadium | 0 | ||
| 7202.93.00 | - - Ferro-niobium | 0 | ||
| 7202.99.00 | - - Other | 0 | ||
| 72.03 | Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms | |||
| 7203.10.00 | - Ferrous products obtained by direct reduction of iron ore | 0 | ||
| 7203.90.00 | - Other | 0 | ||
| 72.04 | Ferrous waste and scrap; remelting scrap ingots of iron or steel | |||
| 7204.10.00 | - Waste and scrap of cast iron | 0 | ||
| - Waste and scrap of alloy steel: | ||||
| 7204.21.00 | - - Of stainless steel | 0 | ||
| 7204.29.00 | - - Other | 0 | ||
| 7204.30.00 | - Waste and scrap of tinned iron or steel | 0 | ||
| - Other waste and scrap: | ||||
| 7204.41.00 | - - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | 0 | ||
| 7204.49.00 | - - Other | 0 | ||
| 7204.50.00 | - Remelting scrap ingots | 0 | ||
| 72.05 | Granules and powders, of pig iron, spiegeleisen, iron or steel | |||
| 7205.10.00 | - Granules | 0 | ||
| - Powders: | ||||
| 7205.21.00 | - - Of alloy steel | 0 | ||
| 7205.29.00 | - - Other | 0 | ||
| 72.06 | Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03) | |||
| 7206.10 | - Ingots: | |||
| 7206.10.10 | - - Containing by weight more than 0.6% of carbon | 0 | ||
| 7206.10.90 | - - Other | 0 | ||
| 7206.90.00 | - Other | 0 | ||
| 72.07 | Semi-finished products of iron or non-alloy steel | |||
| - Containing by weight less than 0.25% of carbon: | ||||
| 7207.11.00 | - - Of rectangular (including square) cross-section, the width measuring less than twice the thickness | 5 | ||
| 7207.12 | - - Other, of rectangular (other than square) cross-section: | |||
| 7207.12.10 | - - - Slabs | 5 | ||
| 7207.12.90 | - - - Other | 5 | ||
| 7207.19.00 | - - Other | 0 | ||
| 7207.20 | - Containing by weight 0.25% or more of carbon: | |||
| - - Containing by weight less than 0.6% of carbon: | ||||
| 7207.20.10 | - - - Slabs | 0 | ID | |
| - - - Other: | ||||
| 7207.20.21 | - - - - Blocks roughly shaped by forging; sheet bars | 0 | ||
| 7207.20.29 | - - - - Other | 5 | ||
| - - Other: | ||||
| 7207.20.91 | - - - Slabs | 0 | ID | |
| - - - Other: | ||||
| 7207.20.92 | - - - - Blocks roughly shaped by forging; sheet bars | 0 | ||
| 7207.20.99 | - - - - Other | 5 | ||
| 72.08 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated | |||
| 7208.10.00 | - In coils, not further worked than hot-rolled, with patterns in relief | 0 | ID, MM, PH | |
| - Other, in coils, not further worked than hot-rolled, pickled: | ||||
| 7208.25.00 | - - Of a thickness of 4.75 mm or more | 0 | ID, MM | |
| 7208.26.00 | - - Of a thickness of 3 mm or more but less than 4.75 mm | 0 | ID, MM | |
| 7208.27 | - - Of a thickness of less than 3 mm: | |||
| - - - Of a thickness of less than 2 mm: | ||||
| 7208.27.11 | - - - - Containing by weight 0.6% or more of carbon | 0 | ID, MM, PH | |
| 7208.27.19 | - - - - Other | 0 | ID, MM, PH | |
| - - - Other: | ||||
| 7208.27.91 | - - - - Containing by weight 0.6% or more of carbon | 0 | ID, MM, PH | |
| 7208.27.99 | - - - - Other | 0 | ID, MM, PH | |
| - Other, in coils, not further worked than hot-rolled: | ||||
| 7208.36.00 | - - Of a thickness exceeding 10 mm | 5 | ||
| 7208.37.00 | - - Of a thickness of 4.75 mm or more but not exceeding 10 mm | 5 | ||
| 7208.38.00 | - - Of a thickness of 3 mm or more but less than 4.75 mm | 5 | ||
| 7208.39 | - - Of a thickness of less than 3 mm: | |||
| 7208.39.10 | - - - Containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less | 0 | ID, MM, PH | |
| 7208.39.20 | - - - Containing by weight less than 0.6% of carbon and of a thickness more than 0.17 mm but not exceeding 1.5 mm | 0 | ID, MM, PH | |
| 7208.39.30 | - - - Containing by weight 0.6% or more of carbon and of a thickness not exceeding 1.5 mm | 0 | ID, MM, PH | |
| 7208.39.40 | - - - Of a thickness more than 2 mm, maximum tensile strength of 550 Mpa and of a width not exceeding 1,250 mm | 0 | ID, MM, PH | |
| 7208.39.90 | - - - Other | 0 | ID, MM, PH | |
| 7208.40.00 | - Not in coils, not further worked than hot-rolled, with patterns in relief | 0 | ID, MM, PH | |
| - Other, not in coils, not further worked than hot-rolled: | ||||
| 7208.51.00 | - - Of a thickness exceeding 10 mm | 0 | ID, MM, PH | |
| 7208.52.00 | - - Of a thickness of 4.75 mm or more but not exceeding 10 mm | 0 | ID, MM | |
| 7208.53.00 | - - Of a thickness of 3 mm or more but less than 4.75 mm | 0 | ID, MM, PH | |
| 7208.54 | - - Of a thickness of less than 3 mm: | |||
| 7208.54.10 | - - - Containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less | 5 | ||
| 7208.54.90 | - - - Other | 5 | ||
| 7208.90 | - Other: | |||
| 7208.90.10 | - - Corrugated | 0 | ID, MM, PH | |
| 7208.90.20 | - - Other, containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less | 0 | ID, MM, PH | |
| 7208.90.90 | - - Other | 0 | ID, MM, PH | |
| 72.09 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated | |||
| - In coils, not further worked than cold-rolled (cold-reduced): | ||||
| 7209.15.00 | - - Of a thickness of 3 mm or more | 5 | ||
| 7209.16 | - - Of a thickness exceeding 1 mm but less than 3 mm: | |||
| 7209.16.10 | - - - Of a width not exceeding 1,250 mm | * | ||
| 7209.16.90 | - - - Other | * | ||
| 7209.17 | - - Of a thickness of 0.5 mm or more but not exceeding 1 mm: | |||
| 7209.17.10 | - - - Of a width not exceeding 1,250 mm | * | ||
| 7209.17.90 | - - - Other | * | ||
| 7209.18 | - - Of a thickness of less than 0.5 mm: | |||
| 7209.18.10 | - - - Tin-mill blackplate | * | ||
| - - - Other: | ||||
| 7209.18.91 | - - - - Containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less | * | ||
| 7209.18.99 | - - - - Other | * | ||
| - Not in coils, not further worked than cold-rolled (cold-reduced): | ||||
| 7209.25.00 | - - Of a thickness of 3 mm or more | 5.6 | ||
| 7209.26 | - - Of a thickness exceeding 1 mm but less than 3 mm: | |||
| 7209.26.10 | - - - Of a width not exceeding 1,250 mm | 5.6 | ||
| 7209.26.90 | - - - Other | 5.6 | ||
| 7209.27 | - - Of a thickness of 0.5 mm or more but not exceeding 1 mm: | |||
| 7209.27.10 | - - - Of a width not exceeding 1,250 mm | 5.6 | ||
| 7209.27.90 | - - - Other | 5.6 | ||
| 7209.28 | - - Of a thickness of less than 0.5 mm: | |||
| 7209.28.10 | - - - Containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less | 5.6 | ||
| 7209.28.90 | - - - Other | 5.6 | ||
| 7209.90 | - Other: | |||
| 7209.90.10 | - - Corrugated | 5 | ||
| 7209.90.90 | - - Other | 5 | ||
| 72.10 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated | |||
| - Plated or coated with tin: | ||||
| 7210.11 | - - Of a thickness of 0.5 mm or more: | |||
| 7210.11.10 | - - - Containing by weight 0.6% or more of carbon | 5.6 | ||
| 7210.11.90 | - - - Other | 5.6 | ||
| 7210.12 | - - Of a thickness of less than 0.5 mm: | |||
| 7210.12.10 | - - - Containing by weight 0.6% or more of carbon | * | ||
| 7210.12.90 | - - - Other | * | ||
| 7210.20 | - Plated or coated with lead, including terne-plate: | |||
| 7210.20.10 | - - Containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less | 0 | ID, MM | |
| 7210.20.90 | - - Other | 0 | ID, MM | |
| 7210.30 | - Electrolytically plated or coated with zinc: | |||
| - - Containing by weight less than 0.6% of carbon: | ||||
| 7210.30.11 | - - - Of a thickness not exceeding 1.2 mm | 8 | ||
| 7210.30.12 | - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | 5 | ||
| 7210.30.19 | - - - Other | 5 | ||
| - - Other: | ||||
| 7210.30.91 | - - - Of a thickness not exceeding 1.2 mm | 8 | ||
| 7210.30.99 | - - - Other | 5 | ||
| - Otherwise plated or coated with zinc: | ||||
| 7210.41 | - - Corrugated: | |||
| - - - Containing by weight less than 0.6% of carbon: | ||||
| 7210.41.11 | - - - - Of a thickness not exceeding 1.2 mm | 32 | ||
| 7210.41.12 | - - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | 32 | ||
| 7210.41.19 | - - - - Other | 8 | ||
| - - - Other: | ||||
| 7210.41.91 | - - - - Of a thickness not exceeding 1.2 mm | 32 | ||
| 7210.41.99 | - - - - Other | 8 | ||
| 7210.49 | - - Other: | |||
| - - - Containing by weight less than 0.6% of carbon: | ||||
| 7210.49.11 | - - - - Coated with zinc by the iron-zinc alloyed coating method, containing by weight less than 0.04% of carbon and of a thickness not exceeding 1.2 mm | 32 | ||
| 7210.49.14 | - - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness not exceeding 1.2 mm | 32 | ||
| 7210.49.15 | - - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | 32 | ||
| 7210.49.16 | - - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness exceeding 1.5 mm | 8 | ||
| 7210.49.17 | - - - - Other, of a thickness not exceeding 1.2 mm | 32 | ||
| 7210.49.18 | - - - - Other, of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | 32 | ||
| 7210.49.19 | - - - - Other | 8 | ||
| - - - Other: | ||||
| 7210.49.91 | - - - - Of a thickness not exceeding 1.2 mm | 32 | ||
| 7210.49.99 | - - - - Other | 8 | ||
| 7210.50.00 | - Plated or coated with chromium oxides or with chromium and chromium oxides | 0 | MM | |
| - Plated or coated with aluminium: | ||||
| 7210.61 | - - Plated or coated with aluminium-zinc alloys: | |||
| - - - Containing by weight less than 0.6% of carbon: | ||||
| 7210.61.11 | - - - - Of a thickness not exceeding 1.2 mm | 32 | ||
| 7210.61.12 | - - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | 8 | ||
| 7210.61.19 | - - - - Other | 8 | ||
| - - - Other: | ||||
| 7210.61.91 | - - - - Of a thickness not exceeding 1.2 mm | 32 | ||
| 7210.61.92 | - - - - Other, corrugated | 8 | ||
| 7210.61.99 | - - - - Other | 8 | ||
| 7210.69 | - - Other: | |||
| - - - Containing by weight less than 0.6% of carbon: | ||||
| 7210.69.11 | - - - - Of a thickness not exceeding 1.2 mm | 5 | ||
| 7210.69.19 | - - - - Other | 5 | ||
| - - - Other: | ||||
| 7210.69.91 | - - - - Of a thickness not exceeding 1.2 mm | 5 | ||
| 7210.69.99 | - - - - Other | 5 | ||
| 7210.70 | - Painted, varnished or coated with plastics: | |||
| - - Containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less: | ||||
| 7210.70.12 | - - - Painted after coating with zinc | 0 | ||
| 7210.70.13 | - - - Painted after coating with aluminium-zinc alloys | 0 | ||
| 7210.70.19 | - - - Other | 0 | ||
| - - Other, containing by weight less than 0.6% of carbon: | ||||
| 7210.70.21 | - - - Painted | 0 | ID, MM, PH | |
| 7210.70.29 | - - - Other | 0 | ID, MM, PH | |
| - - Other: | ||||
| 7210.70.91 | - - - Painted | 0 | ID, MM, PH | |
| 7210.70.99 | - - - Other | 0 | ID, MM, PH | |
| 7210.90 | - Other: | |||
| 7210.90.10 | - - Containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less | 0 | ID | |
| 7210.90.90 | - - Other | 0 | ID | |
| 72.11 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated | |||
| - Not further worked than hot-rolled: | ||||
| 7211.13 | - - Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief: | |||
| - - - Containing by weight less than 0.6% of carbon: | ||||
| 7211.13.12 | - - - - Corrugated | 0 | ID, MM | |
| 7211.13.13 | - - - - Hoop and strip | 0 | ID, MM | |
| 7211.13.14 | - - - - Universal plates | 0 | ID, MM | |
| 7211.13.19 | - - - - Other | 0 | ID, MM | |
| - - - Other: | ||||
| 7211.13.92 | - - - - Hoop and strip | 0 | ID, MM | |
| 7211.13.93 | - - - - Universal plates | 0 | ID, MM | |
| 7211.13.99 | - - - - Other | 0 | ID, MM | |
| 7211.14 | - - Other, of a thickness of 4.75 mm or more: | |||
| - - - Containing by weight less than 0.6% of carbon: | ||||
| 7211.14.14 | - - - - Corrugated | 5 | ||
| 7211.14.15 | - - - - Coils for re-rolling | 5 | ||
| 7211.14.16 | - - - - Hoop and strip | 5 | ||
| 7211.14.17 | - - - - Universal plates | 5 | ||
| 7211.14.19 | - - - - Other | 5 | ||
| - - - Other: | ||||
| 7211.14.94 | - - - - Hoop and strip | 5 | ||
| 7211.14.95 | - - - - Universal plates | 5 | ||
| 7211.14.99 | - - - - Other | 5 | ||
| 7211.19 | - - Other: | |||
| - - - Containing by weight less than 0.6% of carbon: | ||||
| 7211.19.13 | - - - - Hoop and strip; universal plates | 5 | ||
| 7211.19.14 | - - - - Corrugated | 5 | ||
| 7211.19.19 | - - - - Other | 5 | ||
| - - - Other: | ||||
| 7211.19.91 | - - - - Hoop and strip; universal plates | 5 | ||
| 7211.19.99 | - - - - Other | 5 | ||
| - Not further worked than cold-rolled (cold-reduced): | ||||
| 7211.23 | - - Containing by weight less than 0.25% of carbon: | |||
| 7211.23.10 | - - - Corrugated | 0 | ID, MM, PH | |
| 7211.23.20 | - - - Hoop and strip, of a width not exceeding 400 mm | 0 | ID, MM, PH | |
| 7211.23.30 | - - - Other, of a thickness of 0.17 mm or less | 0 | ID, MM, PH | |
| 7211.23.90 | - - - Other | 0 | ID, MM, PH | |
| 7211.29 | - - Other: | |||
| 7211.29.10 | - - - Corrugated | 0 | ID, MM | |
| 7211.29.20 | - - - Hoop and strip, of a width not exceeding 400 mm | 0 | ID, MM | |
| 7211.29.30 | - - - Other, of a thickness of 0.17 mm or less | 0 | ID, MM | |
| 7211.29.90 | - - - Other | 0 | ID, MM | |
| 7211.90 | - Other: | |||
| - - Containing by weight less than 0.6% of carbon: | ||||
| 7211.90.11 | - - - Hoop and strip, of a width not exceeding 25 mm | 0 | ID, MM | |
| 7211.90.12 | - - - Hoop and strip, of a width exceeding 400 mm | 0 | ID, MM | |
| 7211.90.13 | - - - Corrugated | 0 | ID, MM | |
| 7211.90.14 | - - - Other, of a thickness of 0.17 mm or less | 0 | ID, MM | |
| 7211.90.19 | - - - Other | 0 | ID, MM | |
| - - Other: | ||||
| 7211.90.91 | - - - Of a thickness of 0.17 mm or less | 0 | ID, MM | |
| 7211.90.99 | - - - Other | 0 | ID, MM | |
| 72.12 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated | |||
| 7212.10 | - Plated or coated with tin: | |||
| - - Containing by weight less than 0.6% of carbon: | ||||
| 7212.10.11 | - - - Hoop and strip, of a width not exceeding 25 mm | 0 | ID, MM | |
| 7212.10.14 | - - - Hoop and strip, of a width exceeding 400 mm | 0 | ID, MM | |
| 7212.10.19 | - - - Other | 0 | ID, MM | |
| - - Other: | ||||
| 7212.10.94 | - - - Hoop and strip, of a width not exceeding 400 mm | 0 | ID, MM | |
| 7212.10.99 | - - - Other | 0 | ID, MM | |
| 7212.20 | - Electrolytically plated or coated with zinc: | |||
| 7212.20.10 | - - Hoop and strip, of a width not exceeding 400 mm | 0 | ID, MM | |
| 7212.20.20 | - - Other, containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less | 0 | ID, MM | |
| 7212.20.90 | - - Other | 0 | ID, MM | |
| 7212.30 | - Otherwise plated or coated with zinc: | |||
| - - Containing by weight less than 0.6% of carbon: | ||||
| 7212.30.11 | - - - Hoop and strip, of a width not exceeding 25 mm | 0 | ID, MM | |
| 7212.30.12 | - - - Hoop and strip, of a width exceeding 25 mm and not exceeding 400 mm | 0 | ID, MM | |
| 7212.30.13 | - - - Other, of a thickness of 1.5 mm or less | 0 | ID, MM | |
| 7212.30.14 | - - - Other, coated with zinc by the iron-zinc alloy coating method, containing by weight less than 0.04% of carbon | 0 | ID, MM | |
| 7212.30.19 | - - - Other | 0 | ID, MM | |
| 7212.30.90 | - - Other | 0 | ID, MM | |
| 7212.40 | - Painted, varnished or coated with plastics: | |||
| - - Containing by weight less than 0.6% of carbon: | ||||
| 7212.40.11 | - - - Hoop and strip, of a width not exceeding 400 mm | 0 | MM | |
| 7212.40.12 | - - - Other hoop and strip | 0 | ID, MM | |
| 7212.40.13 | - - - Other, painted after coating with zinc | 0 | ID, MM | |
| 7212.40.14 | - - - Other, painted after coating with aluminium-zinc alloys | 0 | ID, MM | |
| 7212.40.19 | - - - Other | 0 | ID, MM | |
| - - Other: | ||||
| 7212.40.91 | - - - Hoop and strip, of a width not exceeding 400 mm | 0 | MM | |
| 7212.40.99 | - - - Other | 0 | ID, MM | |
| 7212.50 | - Otherwise plated or coated: | |||
| - - Plated or coated with chromium oxides or with chromium and chromium oxides: | ||||
| 7212.50.14 | - - - Hoop and strip, of a width exceeding 25 mm; universal plates | 0 | ID, MM | |
| 7212.50.19 | - - - Other | 0 | ID, MM | |
| - - Plated or coated with aluminium-zinc alloys: | ||||
| 7212.50.23 | - - - Hoop and strip, of a width not exceeding 25 mm | 0 | ID, MM | |
| 7212.50.24 | - - - Other hoop and strip; universal plates | 0 | ID, MM | |
| 7212.50.29 | - - - Other | 0 | ID, MM | |
| - - Other: | ||||
| 7212.50.93 | - - - Hoop and strip, of a width not exceeding 25 mm | 0 | ID, MM | |
| 7212.50.94 | - - - Other hoop and strip; universal plates | 0 | ID, MM | |
| 7212.50.99 | - - - Other | 0 | ID, MM | |
| 7212.60 | - Clad: | |||
| - - Containing by weight less than 0.6% of carbon: | ||||
| 7212.60.11 | - - - Hoop and strip | 0 | ID, MM | |
| 7212.60.12 | - - - Other, of a thickness of 1.5 mm or less | 0 | ID, MM | |
| 7212.60.19 | - - - Other | 0 | ID, MM | |
| - - Other: | ||||
| 7212.60.91 | - - - Hoop and strip | 0 | ID, MM | |
| 7212.60.99 | - - - Other | 0 | ID, MM | |
| 72.13 | Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel | |||
| 7213.10 | - Containing indentations, ribs, grooves or other deformations produced during the rolling process: | |||
| 7213.10.10 | - - Of circular cross-section measuring not exceeding 50 mm in diameter | 32 | ||
| 7213.10.90 | - - Other | 32 | ||
| 7213.20.00 | - Other, of free-cutting steel | 0 | ID, MM | |
| - Other: | ||||
| 7213.91 | - - Of circular cross-section measuring less than 14 mm in diameter: | |||
| 7213.91.10 | - - - Of a kind used for producing soldering sticks | 5 | ||
| 7213.91.20 | - - - Of a kind used for concrete reinforcement (rebars) | 32 | ||
| 7213.91.30 | - - - Other, containing by weight 0.6% or more of carbon, not more than 0.03% of phosphorus and not more than 0.035% of sulphur | 0 | ID | |
| 7213.91.90 | - - - Other | 0 | ID | |
| 7213.99 | - - Other: | |||
| 7213.99.10 | - - - Of a kind used for producing soldering sticks | 5 | ||
| 7213.99.20 | - - - Of a kind used for concrete reinforcement (rebars) | 32 | ||
| 7213.99.90 | - - - Other | 0 | ID, MM, MY | |
| 72.14 | Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling | |||
| 7214.10 | - Forged: | |||
| - - Containing by weight less than 0.6% of carbon: | ||||
| 7214.10.11 | - - - Of circular cross-section | 32 | ||
| 7214.10.19 | - - - Other | 32 | ||
| - - Other: | ||||
| 7214.10.21 | - - - Of circular cross-section | 32 | ||
| 7214.10.29 | - - - Other | 32 | ||
| 7214.20 | - Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling: | |||
| - - Containing by weight less than 0.6% of carbon: | ||||
| - - - Of circular cross-section: | ||||
| 7214.20.31 | - - - - Of a kind used for concrete reinforcement (rebars) | 32 | ||
| 7214.20.39 | - - - - Other | 32 | ||
| - - - Other: | ||||
| 7214.20.41 | - - - - Of a kind used for concrete reinforcement (rebars) | 32 | ||
| 7214.20.49 | - - - - Other | 32 | ||
| - - Other: | ||||
| - - - Of circular cross-section: | ||||
| 7214.20.51 | - - - - Of a kind used for concrete reinforcement (rebars) | 32 | ||
| 7214.20.59 | - - - - Other | 32 | ||
| - - - Other: | ||||
| 7214.20.61 | - - - - Of a kind used for concrete reinforcement (rebars) | 32 | ||
| 7214.20.69 | - - - - Other | 32 | ||
| 7214.30 | - Other, of free-cutting steel: | |||
| 7214.30.10 | - - Of circular cross-section | 0 | ||
| 7214.30.90 | - - Other | 0 | ||
| - Other: | ||||
| 7214.91 | - - Of rectangular (other than square) cross-section: | |||
| - - - Containing by weight less than 0.6% of carbon: | ||||
| 7214.91.11 | - - - - Containing by weight 0.38% or more of carbon and less than 1.15% of manganese | 0 | ID, MM | |
| 7214.91.12 | - - - - Containing by weight 0.17% or more but not more than 0.46% of carbon and 1.2% or more but less than 1.65% of manganese | 0 | ID, MM | |
| 7214.91.19 | - - - - Other | 0 | ID, MM | |
| 7214.91.20 | - - - Containing by weight 0.6% or more of carbon | 0 | ID | |
| 7214.99 | - - Other: | |||
| - - - Containing by weight 0.6% or more of carbon, other than of circular cross-section: | ||||
| 7214.99.11 | - - - - Containing by weight less than 1.15% of manganese | 5 | ||
| 7214.99.19 | - - - - Other | 5 | ||
| - - - Other: | ||||
| 7214.99.91 | - - - - Containing by weight less than 0.38% of carbon, not more than 0.05% of phosphorus and not more than 0.05% of sulphur | 5 | ||
| 7214.99.92 | - - - - Containing by weight 0.38% or more of carbon and less than 1.15% of manganese | 5 | ||
| 7214.99.93 | - - - - Containing by weight 0.17% or more but less than 0.46% of carbon and 1.2% or more but less than 1.65% of manganese | 5 | ||
| 7214.99.99 | - - - - Other | 5 | ||
| 72.15 | Other bars and rods of iron or non-alloy steel | |||
| 7215.10 | - Of free-cutting steel, not further worked than cold-formed or cold-finished: | |||
| 7215.10.10 | - - Of circular cross-section | 0 | ID, MM | |
| 7215.10.90 | - - Other | 0 | ID, MM | |
| 7215.50 | - Other, not further worked than cold-formed or cold-finished: | |||
| 7215.50.10 | - - Containing by weight 0.6% or more of carbon, other than of circular cross-section | 50 | ||
| - - Other: | ||||
| 7215.50.91 | - - - Of a kind used for concrete reinforcement (rebars) | 50 | ||
| 7215.50.99 | - - - Other | 50 | ||
| 7215.90 | - Other: | |||
| 7215.90.10 | - - Of a kind used for concrete reinforcement (rebars) | 32 | ||
| - - Other: | ||||
| 7215.90.91 | - - - Of circular cross-section | 32 | ||
| 7215.90.99 | - - - Other | 32 | ||
| 72.16 | Angles, shapes and sections of iron or non-alloy steel | |||
| 7216.10.00 | - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | 32 | ||
| - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm: | ||||
| 7216.21 | - - L sections: | |||
| 7216.21.10 | - - - Containing by weight less than 0.6% of carbon | 32 | ||
| 7216.21.90 | - - - Other | 32 | ||
| 7216.22.00 | - - T sections | 0 | ID | |
| - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more: | ||||
| 7216.31 | - - U sections: | |||
| 7216.31.10 | - - - Containing by weight 0.6% or more of carbon | 32 | ||
| 7216.31.90 | - - - Other | 32 | ||
| 7216.32 | - - I sections: | |||
| 7216.32.10 | - - - Of a thickness of 5 mm or less | 32 | ||
| 7216.32.90 | - - - Other | 32 | ||
| 7216.33 | - - H sections: | |||
| - - - Containing by weight less than 0.6% of carbon: | ||||
| 7216.33.11 | - - - - Thickness of the flange not less than thickness of the web | 32 | ||
| 7216.33.19 | - - - - Other | 32 | ||
| 7216.33.90 | - - - Other | 32 | ||
| 7216.40 | - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: | |||
| 7216.40.10 | - - Containing by weight 0.6% or more of carbon | 32 | ||
| 7216.40.90 | - - Other | 32 | ||
| 7216.50 | - Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded: | |||
| - - Of a height of less than 80 mm: | ||||
| 7216.50.11 | - - - Containing by weight 0.6% or more of carbon | 8 | ||
| 7216.50.19 | - - - Other | 8 | ||
| - - Other: | ||||
| 7216.50.91 | - - - Containing by weight 0.6% or more of carbon | 8 | ||
| 7216.50.99 | - - - Other | 8 | ||
| - Angles, shapes and sections, not further worked than cold-formed or cold-finished: | ||||
| 7216.61.00 | - - Obtained from flat-rolled products | 8 | ||
| 7216.69.00 | - - Other | 8 | ||
| - Other: | ||||
| 7216.91 | - - Cold-formed or cold-finished from flat-rolled products: | |||
| 7216.91.10 | - - - Angles, other than slotted angles, containing by weight 0.6% or more of carbon | 8 | ||
| 7216.91.90 | - - - Other | 8 | ||
| 7216.99.00 | - - Other | 8 | ||
| 72.17 | Wire of iron or non-alloy steel | |||
| 7217.10 | - Not plated or coated, whether or not polished: | |||
| 7217.10.10 | - - Containing by weight less than 0.25% of carbon | 24 | ||
| - - Containing by weight 0.25% or more but less than 0.6% of carbon: | ||||
| 7217.10.22 | - - - Reed wire; wire of a kind used for making strands for prestressing concrete; free-cutting steel wire | 0 | ID, MM, PH | |
| 7217.10.29 | - - - Other | 0 | ID, MM, PH | |
| - - Containing by weight 0.6% or more of carbon: | ||||
| 7217.10.32 | - - - Spokes wire; reed wire; free-cutting steel wire | 0 | ID, MM, PH | |
| 7217.10.33 | - - - Wire of a kind used for making strands for prestressing concrete | 0 | ID, MM, PH | |
| 7217.10.39 | - - - Other | 0 | ID, MM, PH | |
| 7217.20 | - Plated or coated with zinc: | |||
| 7217.20.10 | - - Containing by weight less than 0.25% of carbon | 24 | ||
| 7217.20.20 | - - Containing by weight 0.25% or more of carbon but less than 0.45% of carbon | 0 | ID, MM | |
| - - Containing by weight 0.45% or more of carbon: | ||||
| 7217.20.91 | - - - Steel core wire of a kind used for steel reinforced aluminium conductors (ACSR) | 0 | ID, MM | |
| 7217.20.99 | - - - Other | 0 | ID, MM | |
| 7217.30 | - Plated or coated with other base metals: | |||
| - - Containing by weight less than 0.25% of carbon: | ||||
| 7217.30.11 | - - - Plated or coated with tin | 5 | ||
| 7217.30.19 | - - - Other | 5 | ||
| 7217.30.20 | - - Containing by weight 0.25% or more of carbon but less than 0.6% of carbon | 0 | ID, MM, MY, PH | |
| - - Containing by weight 0.6% or more of carbon: | ||||
| 7217.30.33 | - - - Brass coated steel wire of a kind used in the manufacture of pneumatic rubber tyres | 0 | ID, MM, MY | |
| 7217.30.34 | - - - Other copper alloy coated steel wire of a kind used in the manufacture of pneumatic rubber tyres | 0 | ID, MM, MY | |
| 7217.30.35 | - - - Other, plated or coated with tin | 0 | ID, MM, MY, PH | |
| 7217.30.39 | - - - Other | 0 | ID, MM, MY, PH | |
| 7217.90 | - Other: | |||
| 7217.90.10 | - - Containing by weight less than 0.25% of carbon | 0 | ID, MM, PH | |
| 7217.90.90 | - - Other | 0 | ID, MM, PH | |
| 72.18 | Stainless steel in ingots or other primary forms; semi-finished products of stainless steel | |||
| 7218.10.00 | - Ingots and other primary forms | 0 | ||
| - Other: | ||||
| 7218.91.00 | - - Of rectangular (other than square) cross-section | 0 | ||
| 7218.99.00 | - - Other | 0 | ||
| 72.19 | Flat-rolled products of stainless steel, of a width of 600 mm or more | |||
| - Not further worked than hot-rolled, in coils: | ||||
| 7219.11.00 | - - Of a thickness exceeding 10 mm | 0 | ||
| 7219.12.00 | - - Of a thickness of 4.75 mm or more but not exceeding 10 mm | 0 | ||
| 7219.13.00 | - - Of a thickness of 3 mm or more but less than 4.75 mm | 0 | ||
| 7219.14.00 | - - Of a thickness of less than 3 mm | 0 | ||
| - Not further worked than hot-rolled, not in coils: | ||||
| 7219.21.00 | - - Of a thickness exceeding 10 mm | 0 | ||
| 7219.22.00 | - - Of a thickness of 4.75 mm or more but not exceeding 10 mm | 0 | ||
| 7219.23.00 | - - Of a thickness of 3 mm or more but less than 4.75 mm | 0 | ||
| 7219.24.00 | - - Of a thickness of less than 3 mm | 0 | ||
| - Not further worked than cold-rolled (cold-reduced): | ||||
| 7219.31.00 | - - Of a thickness of 4.75 mm or more | 0 | ID | |
| 7219.32.00 | - - Of a thickness of 3 mm or more but less than 4.75 mm | 0 | ID | |
| 7219.33.00 | - - Of a thickness exceeding 1 mm but less than 3 mm | 0 | ||
| 7219.34.00 | - - Of a thickness of 0.5 mm or more but not exceeding 1 mm | 0 | ||
| 7219.35.00 | - - Of a thickness of less than 0.5 mm | 0 | ID | |
| 7219.90.00 | - Other | 0 | ID | |
| 72.20 | Flat-rolled products of stainless steel, of a width of less than 600 mm | |||
| - Not further worked than hot-rolled: | ||||
| 7220.11 | - - Of a thickness of 4.75 mm or more: | |||
| 7220.11.10 | - - - Hoop and strip, of a width not exceeding 400 mm | 0 | ||
| 7220.11.90 | - - - Other | 0 | ||
| 7220.12 | - - Of a thickness of less than 4.75 mm: | |||
| 7220.12.10 | - - - Hoop and strip, of a width not exceeding 400 mm | 0 | ||
| 7220.12.90 | - - - Other | 0 | ||
| 7220.20 | - Not further worked than cold-rolled (cold-reduced): | |||
| 7220.20.10 | - - Hoop and strip, of a width not exceeding 400 mm | 0 | ID | |
| 7220.20.90 | - - Other | 0 | ID | |
| 7220.90 | - Other: | |||
| 7220.90.10 | - - Hoop and strip, of a width not exceeding 400 mm | 0 | ID, MY | |
| 7220.90.90 | - - Other | 0 | ID, MY | |
| 7221.00.00 | Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel | 0 | ||
| 72.22 | Other bars and rods of stainless steel; angles, shapes and sections of stainless steel | |||
| - Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: | ||||
| 7222.11.00 | - - Of circular cross-section | 0 | MY | |
| 7222.19.00 | - - Other | 0 | ||
| 7222.20 | - Bars and rods, not further worked than cold-formed or cold-finished: | |||
| 7222.20.10 | - - Of circular cross-section | 0 | ||
| 7222.20.90 | - - Other | 0 | ||
| 7222.30 | - Other bars and rods: | |||
| 7222.30.10 | - - Of circular cross-section | 0 | ||
| 7222.30.90 | - - Other | 0 | ||
| 7222.40 | - Angles, shapes and sections: | |||
| 7222.40.10 | - - Not further worked than hot-rolled, hot-drawn or extruded | 0 | ID | |
| 7222.40.90 | - - Other | 0 | ID | |
| 72.23 | Wire of stainless steel | |||
| 7223.00.10 | - Of cross-section exceeding 13 mm | 0 | MM, MY | |
| 7223.00.90 | - Other | 0 | MM, MY | |
| 72.24 | Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel | |||
| 7224.10.00 | - Ingots and other primary forms | 0 | ||
| 7224.90.00 | - Other | 0 | ||
| 72.25 | Flat-rolled products of other alloy steel, of a width of 600 mm or more | |||
| - Of silicon-electrical steel: | ||||
| 7225.11.00 | - - Grain-oriented | 0 | ||
| 7225.19.00 | - - Other | 0 | ||
| 7225.30 | - Other, not further worked than hot-rolled, in coils: | |||
| 7225.30.10 | - - Of high speed steel | 0 | ||
| 7225.30.90 | - - Other | 0 | ||
| 7225.40 | - Other, not further worked than hot-rolled, not in coils: | |||
| 7225.40.10 | - - Of high speed steel | 0 | ||
| 7225.40.90 | - - Other | 0 | ||
| 7225.50 | - Other, not further worked than cold-rolled (cold-reduced): | |||
| 7225.50.10 | - - Of high speed steel | 0 | ||
| 7225.50.90 | - - Other | 0 | ||
| - Other: | ||||
| 7225.91 | - - Electrolytically plated or coated with zinc: | |||
| 7225.91.10 | - - - Of high speed steel | 0 | ||
| 7225.91.90 | - - - Other | 0 | ||
| 7225.92 | - - Otherwise plated or coated with zinc: | |||
| 7225.92.10 | - - - Of high speed steel | 0 | ||
| 7225.92.20 | - - - Other, plated or coated with zinc-aluminium-magnesium alloys | 0 | ||
| 7225.92.90 | - - - Other | 0 | ||
| 7225.99 | - - Other: | |||
| 7225.99.10 | - - - Of high speed steel | 0 | ||
| 7225.99.90 | - - - Other | 0 | ||
| 72.26 | Flat-rolled products of other alloy steel, of a width of less than 600 mm | |||
| - Of silicon-electrical steel: | ||||
| 7226.11 | - - Grain-oriented: | |||
| 7226.11.10 | - - - Hoop and strip, of a width not exceeding 400 mm | 0 | ||
| 7226.11.90 | - - - Other | 0 | ||
| 7226.19 | - - Other: | |||
| 7226.19.10 | - - - Hoop and strip, of a width not exceeding 400 mm | 0 | ||
| 7226.19.90 | - - - Other | 0 | ||
| 7226.20 | - Of high speed steel: | |||
| 7226.20.10 | - - Hoop and strip, of a width not exceeding 400 mm | 0 | ||
| 7226.20.90 | - - Other | 0 | ||
| - Other: | ||||
| 7226.91 | - - Not further worked than hot-rolled: | |||
| 7226.91.10 | - - - Hoop and strip, of a width not exceeding 400 mm | 0 | ||
| 7226.91.90 | - - - Other | 0 | ||
| 7226.92 | - - Not further worked than cold-rolled (cold-reduced): | |||
| 7226.92.10 | - - - Hoop and strip, of a width not exceeding 400 mm | 0 | ||
| 7226.92.90 | - - - Other | 0 | ||
| 7226.99 | - - Other: | |||
| - - - In the form of strips and bands, of a width not exceeding 400 mm: | ||||
| 7226.99.11 | - - - - Plated or coated with zinc | 0 | ||
| 7226.99.19 | - - - - Other | 0 | ||
| - - - Other: | ||||
| 7226.99.91 | - - - - Plated or coated with zinc | 0 | ||
| 7226.99.99 | - - - - Other | 0 | ||
| 72.27 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel | |||
| 7227.10.00 | - Of high speed steel | 0 | ||
| 7227.20.00 | - Of silico-manganese steel | 0 | ||
| 7227.90 | - Other: | |||
| 7227.90.10 | - - Containing by weight 0.5% or more of chromium | 0 | ||
| 7227.90.90 | - - Other | 0 | ||
| 72.28 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel | |||
| 7228.10 | - Bars and rods, of high speed steel: | |||
| 7228.10.10 | - - Of circular cross-section | 0 | ||
| 7228.10.90 | - - Other | 0 | ||
| 7228.20 | - Bars and rods, of silico-manganese steel: | |||
| - - Of circular cross-section: | ||||
| 7228.20.11 | - - - Not further worked than hot-rolled, hot-drawn or extruded | 0 | ||
| 7228.20.19 | - - - Other | 0 | ||
| - - Other: | ||||
| 7228.20.91 | - - - Not further worked than hot-rolled, hot - drawn or extruded | 0 | ||
| 7228.20.99 | - - - Other | 0 | ||
| 7228.30 | - Other bars and rods, not further worked than hot - rolled, hot -drawn or extruded: | |||
| 7228.30.10 | - - Of circular cross-section | 0 | ||
| 7228.30.90 | - - Other | 0 | ||
| 7228.40 | - Other bars and rods, not further worked than forged: | |||
| 7228.40.10 | - - Of circular cross-section | 0 | ||
| 7228.40.90 | - - Other | 0 | ||
| 7228.50 | - Other bars and rods, not further worked than cold-formed or cold-finished: | |||
| 7228.50.10 | - - Of circular cross-section | 0 | ||
| 7228.50.90 | - - Other | 0 | ||
| 7228.60 | - Other bars and rods: | |||
| 7228.60.10 | - - Of circular cross-section | 0 | ||
| 7228.60.90 | - - Other | 0 | ||
| 7228.70 | - Angles, shapes and sections: | |||
| 7228.70.10 | - - Not further worked than hot-rolled, hot-drawn or extruded | 0 | ID | |
| 7228.70.90 | - - Other | 0 | ID | |
| 7228.80 | - Hollow drill bars and rods: | |||
| - - Containing by weight 0.6% or more of carbon: | ||||
| 7228.80.11 | - - - Of circular cross-section | 0 | ||
| 7228.80.19 | - - - Other | 0 | ||
| 7228.80.90 | - - Other | 0 | ||
| 72.29 | Wire of other alloy steel | |||
| 7229.20.00 | - Of silico-manganese steel | 0 | MM | |
| 7229.90 | - Other: | |||
| - - Of cross-section not exceeding 5.5 mm: | ||||
| 7229.90.21 | - - - Containing by weight 0.5% or more of chromium | 0 | ||
| 7229.90.29 | - - - Other | 0 | ||
| 7229.90.30 | - - Other, of high speed steel | 0 | ||
| - - Other: | ||||
| 7229.90.91 | - - - Containing by weight 0.5% or more of chromium | 0 | ||
| 7229.90.99 | - - - Other | 0 |
Digitised for reference; formatting may differ slightly from the original — verify against the attached original file or the official gazette. Vietnamese legal text.