Tariff schedule VJEPA (Vietnam - Japan) 2022-2028

Attached to Decree No. 124/2022/ND-CP

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97

Chapter 72 — Iron and steel

594 rows

Commodity code	Description of goods	VJEPA rate (%)
Commodity code	Description of goods	30/12 /2022 - 31/3/2023	01/4/2023 - 31/3/2024	01/4/2024 - 31/3/2025	01/4/2025 - 31/3/2026	1/4/2026 - 31/3/2027	1/4/2027 - 31/3/2028
	Chapter 72
	Iron and steel
72.01	Pig iron and, spiegeleisen in pigs, blocks or other primary forms
7201.10.00	- Non-alloy pig iron containing by weight 0.5% or less of phosphorus	0	0	0	0	0	0
7201.20.00	- Non-alloy pig iron containing by weight more than 0.5% of phosphorus	0	0	0	0	0	0
7201.50.00	- Alloy pig iron; spiegeleisen	0	0	0	0	0	0
72.02	Ferro-alloys
	- Ferro-manganese:
7202.11.00	- - Containing by weight more than 2% of carbon	0	0	0	0	0	0
7202.19.00	- - Other	0	0	0	0	0	0
	- Ferro-silicon:
7202.21.00	- - Containing by weight more than 55% of silicon	0	0	0	0	0	0
7202.29.00	- - Other	0	0	0	0	0	0
7202.30.00	- Ferro-silico-manganese	0	0	0	0	0	0
	- Ferro-chromium:
7202.41.00	- - Containing by weight more than 4% of carbon	0	0	0	0	0	0
7202.49.00	- - Other	0	0	0	0	0	0
7202.50.00	- Ferro-silico-chromium	0	0	0	0	0	0
7202.60.00	- Ferro-nickel	0	0	0	0	0	0
7202.70.00	- Ferro-molybdenum	0	0	0	0	0	0
7202.80.00	- Ferro-tungsten and ferro-silico-tungsten	0	0	0	0	0	0
	- Other:
7202.91.00	- - Ferro-titanium and ferro-silico-titanium	0	0	0	0	0	0
7202.92.00	- - Ferro-vanadium	0	0	0	0	0	0
7202.93.00	- - Ferro-niobium	0	0	0	0	0	0
7202.99.00	- - Other	0	0	0	0	0	0
72.03	Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms
7203.10.00	- Ferrous products obtained by direct reduction of iron ore	0	0	0	0	0	0
7203.90.00	- Other	0	0	0	0	0	0
72.04	Ferrous waste and scrap; remelting scrap ingots of iron or steel
7204.10.00	- Waste and scrap of cast iron	0	0	0	0	0	0
	- Waste and scrap of alloy steel:
7204.21.00	- - Of stainless steel	0	0	0	0	0	0
7204.29.00	- - Other	0	0	0	0	0	0
7204.30.00	- Waste and scrap of tinned iron or steel	0	0	0	0	0	0
	- Other waste and scrap:
7204.41.00	- - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles	0	0	0	0	0	0
7204.49.00	- - Other	0	0	0	0	0	0
7204.50.00	- Remelting scrap ingots	0	0	0	0	0	0
72.05	Granules and powders, of pig iron, spiegeleisen, iron or steel
7205.10.00	- Granules	0	0	0	0	0	0
	- Powders:
7205.21.00	- - Of alloy steel	0	0	0	0	0	0
7205.29.00	- - Other	0	0	0	0	0	0
72.06	Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03)
7206.10	- Ingots:
7206.10.10	- - Containing by weight more than 0.6% of carbon	0	0	0	0	0	0
7206.10.90	- - Other	0	0	0	0	0	0
7206.90.00	- Other	0	0	0	0	0	0
72.07	Semi-finished products of iron or non-alloy steel
	- Containing by weight less than 0.25% of carbon:
7207.11.00	- - Of rectangular (including square) cross-section, the width measuring less than twice the thickness	5	5	5	5	5	5
7207.12	- - Other, of rectangular (other than square) cross-section:
7207.12.10	- - - Slabs	0	0	0	0	0	0
7207.12.90	- - - Other	0	0	0	0	0	0
7207.19.00	- - Other	0	0	0	0	0	0
7207.20	- Containing by weight 0.25% or more of carbon:
	- - Containing by weight less than 0.6% of carbon:
7207.20.10	- - - Slabs	0	0	0	0	0	0
	- - - Other:
7207.20.21	- - - - Blocks roughly shaped by forging; sheet bars	0	0	0	0	0	0
7207.20.29	- - - - Other	0	0	0	0	0	0
	- - Other:
7207.20.91	- - - Slabs	0	0	0	0	0	0
	- - - Other:
7207.20.92	- - - - Blocks roughly shaped by forging; sheet bars	0	0	0	0	0	0
7207.20.99	- - - - Other	0	0	0	0	0	0
72.08	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
7208.10.00	- In coils, not further worked than hot-rolled, with patterns in relief	0	0	0	0	0	0
	- Other, in coils, not further worked than hot-rolled, pickled:
7208.25.00	- - Of a thickness of 4.75 mm or more	0	0	0	0	0	0
7208.26.00	- - Of a thickness of 3 mm or more but less than 4.75 mm	0	0	0	0	0	0
7208.27	- - Of a thickness of less than 3 mm:
	- - - Of a thickness of less than 2 mm:
7208.27.11	- - - - Containing by weight 0.6% or more of carbon	0	0	0	0	0	0
7208.27.19	- - - - Other	0	0	0	0	0	0
	- - - Other:
7208.27.91	- - - - Containing by weight 0.6% or more of carbon	0	0	0	0	0	0
7208.27.99	- - - - Other	0	0	0	0	0	0
	- Other, in coils, not further worked than hot-rolled:
7208.36.00	- - Of a thickness exceeding 10 mm	0	0	0	0	0	0
7208.37.00	- - Of a thickness of 4.75 mm or more but not exceeding 10 mm	0	0	0	0	0	0
7208.38.00	- - Of a thickness of 3 mm or more but less than 4.75 mm	0	0	0	0	0	0
7208.39	- - Of a thickness of less than 3 mm:
7208.39.10	- - - Containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less	0	0	0	0	0	0
7208.39.20	- - - Containing by weight less than 0.6% of carbon and of a thickness more than 0.17 mm but not exceeding 1.5 mm	0	0	0	0	0	0
7208.39.30	- - - Containing by weight 0.6% or more of carbon and of a thickness not exceeding 1.5 mm	0	0	0	0	0	0
7208.39.40	- - - Of a thickness more than 2 mm, maximum tensile strength of 550 Mpa and of a width not exceeding 1,250 mm	0	0	0	0	0	0
7208.39.90	- - - Other	0	0	0	0	0	0
7208.40.00	- Not in coils, not further worked than hot-rolled, with patterns in relief	0	0	0	0	0	0
	- Other, not in coils, not further worked than hot-rolled:
7208.51.00	- - Of a thickness exceeding 10 mm	0	0	0	0	0	0
7208.52.00	- - Of a thickness of 4.75 mm or more but not exceeding 10 mm	0	0	0	0	0	0
7208.53.00	- - Of a thickness of 3 mm or more but less than 4.75 mm	0	0	0	0	0	0
7208.54	- - Of a thickness of less than 3 mm:
7208.54.10	- - - Containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less	*	*	*	*	*	*
7208.54.90	- - - Other	*	*	*	*	*	*
7208.90	- Other:
7208.90.10	- - Corrugated	0	0	0	0	0	0
7208.90.20	- - Other, containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less	0	0	0	0	0	0
7208.90.90	- - Other	0	0	0	0	0	0
72.09	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
	- In coils, not further worked than cold-rolled (cold-reduced):
7209.15.00	- - Of a thickness of 3 mm or more	*	*	*	*	*	*
7209.16	- - Of a thickness exceeding 1 mm but less than 3 mm:
7209.16.10	- - - Of a width not exceeding 1,250 mm	5	5	0	0	0	0
7209.16.90	- - - Other	5	5	0	0	0	0
7209.17	- - Of a thickness of 0.5 mm or more but not exceeding 1 mm:
7209.17.10	- - - Of a width not exceeding 1,250 mm	5	5	0	0	0	0
7209.17.90	- - - Other	5	5	0	0	0	0
7209.18	- - Of a thickness of less than 0.5 mm:
7209.18.10	- - - Tin-mill blackplate	3	3	0	0	0	0
	- - - Other:
7209.18.91	- - - - Containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less	10	5	0	0	0	0
7209.18.99	- - - - Other	10	5	0	0	0	0
	- Not in coils, not further worked than cold-rolled (cold-reduced):
7209.25.00	- - Of a thickness of 3 mm or more	*	*	*	*	*	*
7209.26	- - Of a thickness exceeding 1 mm but less than 3 mm:
7209.26.10	- - - Of a width not exceeding 1,250 mm	*	*	*	*	*	*
7209.26.90	- - - Other	*	*	*	*	*	*
7209.27	- - Of a thickness of 0.5 mm or more but not exceeding 1 mm:
7209.27.10	- - - Of a width not exceeding 1,250 mm	*	*	*	*	*	*
7209.27.90	- - - Other	*	*	*	*	*	*
7209.28	- - Of a thickness of less than 0.5 mm:
7209.28.10	- - - Containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less	*	*	*	*	*	*
7209.28.90	- - - Other	*	*	*	*	*	*
7209.90	- Other:
7209.90.10	- - Corrugated	*	*	*	*	*	*
7209.90.90	- - Other	*	*	*	*	*	*
72.10	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
	- Plated or coated with tin:
7210.11	- - Of a thickness of 0.5 mm or more:
7210.11.10	- - - Containing by weight 0.6% or more of carbon	0	0	0	0	0	0
7210.11.90	- - - Other	0	0	0	0	0	0
7210.12	- - Of a thickness of less than 0.5 mm:
7210.12.10	- - - Containing by weight 0.6% or more of carbon	*	*	*	*	*	*
7210.12.90	- - - Other	*	*	*	*	*	*
7210.20	- Plated or coated with lead, including terne-plate:
7210.20.10	- - Containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less	0	0	0	0	0	0
7210.20.90	- - Other	0	0	0	0	0	0
7210.30	- Electrolytically plated or coated with zinc:
	- - Containing by weight less than 0.6% of carbon:
7210.30.11	- - - Of a thickness not exceeding 1.2 mm	0	0	0	0	0	0
7210.30.12	- - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm	0	0	0	0	0	0
7210.30.19	- - - Other	0	0	0	0	0	0
	- - Other:
7210.30.91	- - - Of a thickness not exceeding 1.2 mm	0	0	0	0	0	0
7210.30.99	- - - Other	0	0	0	0	0	0
	- Otherwise plated or coated with zinc:
7210.41	- - Corrugated:
	- - - Containing by weight less than 0.6% of carbon:
7210.41.11	- - - - Of a thickness not exceeding 1.2 mm	12	12	12	12	12	12
7210.41.12	- - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm	0	0	0	0	0	0
7210.41.19	- - - - Other	0	0	0	0	0	0
	- - - Other:
7210.41.91	- - - - Of a thickness not exceeding 1.2 mm	12	12	12	12	12	12
7210.41.99	- - - - Other	0	0	0	0	0	0
7210.49	- - Other:
	- - - Containing by weight less than 0.6% of carbon:
7210.49.11	- - - - Coated with zinc by the iron-zinc alloyed coating method, containing by weight less than 0.04% of carbon and of a thickness not exceeding 1.2 mm	0	0	0	0	0	0
7210.49.14	- - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness not exceeding 1.2 mm	0	0	0	0	0	0
7210.49.15	- - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness exceeding 1.2 mm but not exceeding 1.5 mm	0	0	0	0	0	0
7210.49.16	- - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness exceeding 1.5 mm	0	0	0	0	0	0
7210.49.17	- - - - Other, of a thickness not exceeding 1.2 mm	0	0	0	0	0	0
7210.49.18	- - - - Other, of a thickness exceeding 1.2 mm but not exceeding 1.5 mm	0	0	0	0	0	0
7210.49.19	- - - - Other	0	0	0	0	0	0
	- - - Other:
7210.49.91	- - - - Of a thickness not exceeding 1.2 mm	0	0	0	0	0	0
7210.49.99	- - - - Other	0	0	0	0	0	0
7210.50.00	- Plated or coated with chromium oxides or with chromium and chromium oxides	*	*	*	*	*	*
	- Plated or coated with aluminium:
7210.61	- - Plated or coated with aluminium-zinc alloys:
	- - - Containing by weight less than 0.6% of carbon:
7210.61.11	- - - - Of a thickness not exceeding 1.2 mm	*	*	*	*	*	*
7210.61.12	- - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm	0	0	0	0	0	0
7210.61.19	- - - - Other	0	0	0	0	0	0
	- - - Other:
7210.61.91	- - - - Of a thickness not exceeding 1.2 mm	*	*	*	*	*	*
7210.61.92	- - - - Other, corrugated	0	0	0	0	0	0
7210.61.99	- - - - Other	0	0	0	0	0	0
7210.69	- - Other:
	- - - Containing by weight less than 0.6% of carbon:
7210.69.11	- - - - Of a thickness not exceeding 1.2 mm	0	0	0	0	0	0
7210.69.19	- - - - Other	0	0	0	0	0	0
	- - - Other:
7210.69.91	- - - - Of a thickness not exceeding 1.2 mm	0	0	0	0	0	0
7210.69.99	- - - - Other	0	0	0	0	0	0
7210.70	- Painted, varnished or coated with plastics:
	- - Containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less:
7210.70.12	- - - Painted after coating with zinc	0	0	0	0	0	0
7210.70.13	- - - Painted after coating with aluminium-zinc alloys	0	0	0	0	0	0
7210.70.19	- - - Other	0	0	0	0	0	0
	- - Other, containing by weight less than 0.6% of carbon:
7210.70.21	- - - Painted	0	0	0	0	0	0
7210.70.29	- - - Other	0	0	0	0	0	0
	- - Other:
7210.70.91	- - - Painted	0	0	0	0	0	0
7210.70.99	- - - Other	0	0	0	0	0	0
7210.90	- Other:
7210.90.10	- - Containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less	0	0	0	0	0	0
7210.90.90	- - Other	0	0	0	0	0	0
72.11	Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
	- Not further worked than hot-rolled:
7211.13	- - Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief:
	- - - Containing by weight less than 0.6% of carbon:
7211.13.12	- - - - Corrugated	0	0	0	0	0	0
7211.13.13	- - - - Hoop and strip	0	0	0	0	0	0
7211.13.14	- - - - Universal plates	0	0	0	0	0	0
7211.13.19	- - - - Other	0	0	0	0	0	0
	- - - Other:
7211.13.92	- - - - Hoop and strip	0	0	0	0	0	0
7211.13.93	- - - - Universal plates	0	0	0	0	0	0
7211.13.99	- - - - Other	0	0	0	0	0	0
7211.14	- - Other, of a thickness of 4.75 mm or more:
	- - - Containing by weight less than 0.6% of carbon:
7211.14.14	- - - - Corrugated	0	0	0	0	0	0
7211.14.15	- - - - Coils for re-rolling	0	0	0	0	0	0
7211.14.16	- - - - Hoop and strip	0	0	0	0	0	0
7211.14.17	- - - - Universal plates	0	0	0	0	0	0
7211.14.19	- - - - Other	0	0	0	0	0	0
	- - - Other:
7211.14.94	- - - - Hoop and strip	0	0	0	0	0	0
7211.14.95	- - - - Universal plates	0	0	0	0	0	0
7211.14.99	- - - - Other	0	0	0	0	0	0
7211.19	- - Other:
	- - - Containing by weight less than 0.6% of carbon:
7211.19.13	- - - - Hoop and strip; universal plates	0	0	0	0	0	0
7211.19.14	- - - - Corrugated	0	0	0	0	0	0
7211.19.19	- - - - Other	0	0	0	0	0	0
	- - - Other:
7211.19.91	- - - - Hoop and strip; universal plates	0	0	0	0	0	0
7211.19.99	- - - - Other	0	0	0	0	0	0
	- Not further worked than cold-rolled (cold-reduced):
7211.23	- - Containing by weight less than 0.25% of carbon:
7211.23.10	- - - Corrugated	0	0	0	0	0	0
7211.23.20	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7211.23.30	- - - Other, of a thickness of 0.17 mm or less	0	0	0	0	0	0
7211.23.90	- - - Other	0	0	0	0	0	0
7211.29	- - Other:
7211.29.10	- - - Corrugated	0	0	0	0	0	0
7211.29.20	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7211.29.30	- - - Other, of a thickness of 0.17 mm or less	0	0	0	0	0	0
7211.29.90	- - - Other	0	0	0	0	0	0
7211.90	- Other:
	- - Containing by weight less than 0.6% of carbon:
7211.90.11	- - - Hoop and strip, of a width not exceeding 25 mm	0	0	0	0	0	0
7211.90.12	- - - Hoop and strip, of a width exceeding 400 mm	0	0	0	0	0	0
7211.90.13	- - - Corrugated	0	0	0	0	0	0
7211.90.14	- - - Other, of a thickness of 0.17 mm or less	0	0	0	0	0	0
7211.90.19	- - - Other	0	0	0	0	0	0
	- - Other:
7211.90.91	- - - Of a thickness of 0.17 mm or less	0	0	0	0	0	0
7211.90.99	- - - Other	0	0	0	0	0	0
72.12	Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
7212.10	- Plated or coated with tin:
	- - Containing by weight less than 0.6% of carbon:
7212.10.11	- - - Hoop and strip, of a width not exceeding 25 mm	0	0	0	0	0	0
7212.10.14	- - - Hoop and strip, of a width exceeding 400 mm	0	0	0	0	0	0
7212.10.19	- - - Other	0	0	0	0	0	0
	- - Other:
7212.10.94	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7212.10.99	- - - Other	0	0	0	0	0	0
7212.20	- Electrolytically plated or coated with zinc:
7212.20.10	- - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7212.20.20	- - Other, containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less	0	0	0	0	0	0
7212.20.90	- - Other	0	0	0	0	0	0
7212.30	- Otherwise plated or coated with zinc:
	- - Containing by weight less than 0.6% of carbon:
7212.30.11	- - - Hoop and strip, of a width not exceeding 25 mm	0	0	0	0	0	0
7212.30.12	- - - Hoop and strip, of a width exceeding 25 mm and not exceeding 400 mm	0	0	0	0	0	0
7212.30.13	- - - Other, of a thickness of 1.5 mm or less	0	0	0	0	0	0
7212.30.14	- - - Other, coated with zinc by the iron-zinc alloy coating method, containing by weight less than 0.04% of carbon	0	0	0	0	0	0
7212.30.19	- - - Other	0	0	0	0	0	0
7212.30.90	- - Other	0	0	0	0	0	0
7212.40	- Painted, varnished or coated with plastics:
	- - Containing by weight less than 0.6% of carbon:
7212.40.11	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7212.40.12	- - - Other hoop and strip	0	0	0	0	0	0
7212.40.13	- - - Other, painted after coating with zinc	0	0	0	0	0	0
7212.40.14	- - - Other, painted after coating with aluminium-zinc alloys	0	0	0	0	0	0
7212.40.19	- - - Other	0	0	0	0	0	0
	- - Other:
7212.40.91	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7212.40.99	- - - Other	0	0	0	0	0	0
7212.50	- Otherwise plated or coated:
	- - Plated or coated with chromium oxides or with chromium and chromium oxides:
7212.50.14	- - - Hoop and strip, of a width exceeding 25 mm; universal plates	0	0	0	0	0	0
7212.50.19	- - - Other	0	0	0	0	0	0
	- - Plated or coated with aluminium-zinc alloys:
7212.50.23	- - - Hoop and strip, of a width not exceeding 25 mm	0	0	0	0	0	0
7212.50.24	- - - Other hoop and strip; universal plates	0	0	0	0	0	0
7212.50.29	- - - Other	0	0	0	0	0	0
	- - Other:
7212.50.93	- - - Hoop and strip, of a width not exceeding 25 mm	0	0	0	0	0	0
7212.50.94	- - - Other hoop and strip; universal plates	0	0	0	0	0	0
7212.50.99	- - - Other	0	0	0	0	0	0
7212.60	- Clad:
	- - Containing by weight less than 0.6% of carbon:
7212.60.11	- - - Hoop and strip	0	0	0	0	0	0
7212.60.12	- - - Other, of a thickness of 1.5 mm or less	0	0	0	0	0	0
7212.60.19	- - - Other	0	0	0	0	0	0
	- - Other:
7212.60.91	- - - Hoop and strip	0	0	0	0	0	0
7212.60.99	- - - Other	0	0	0	0	0	0
72.13	Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
7213.10	- Containing indentations, ribs, grooves or other deformations produced during the rolling process:
7213.10.10	- - Of circular cross-section measuring not exceeding 50 mm in diameter	0	0	0	0	0	0
7213.10.90	- - Other	0	0	0	0	0	0
7213.20.00	- Other, of free-cutting steel	0	0	0	0	0	0
	- Other:
7213.91	- - Of circular cross-section measuring less than 14 mm in diameter:
7213.91.10	- - - Of a kind used for producing soldering sticks	0	0	0	0	0	0
7213.91.20	- - - Of a kind used for concrete reinforcement (rebars)	0	0	0	0	0	0
7213.91.30	- - - Other, containing by weight 0.6% or more of carbon, not more than 0.03% of phosphorus and not more than 0.035% of sulphur	0	0	0	0	0	0
7213.91.90	- - - Other	0	0	0	0	0	0
7213.99	- - Other:
7213.99.10	- - - Of a kind used for producing soldering sticks	0	0	0	0	0	0
7213.99.20	- - - Of a kind used for concrete reinforcement (rebars)	0	0	0	0	0	0
7213.99.90	- - - Other	0	0	0	0	0	0
72.14	Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
7214.10	- Forged:
	- - Containing by weight less than 0.6% of carbon:
7214.10.11	- - - Of circular cross-section	0	0	0	0	0	0
7214.10.19	- - - Other	0	0	0	0	0	0
	- - Other:
7214.10.21	- - - Of circular cross-section	0	0	0	0	0	0
7214.10.29	- - - Other	0	0	0	0	0	0
7214.20	- Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling:
	- - Containing by weight less than 0.6% of carbon:
	- - - Of circular cross-section:
7214.20.31	- - - - Of a kind used for concrete reinforcement (rebars)	0	0	0	0	0	0
7214.20.39	- - - - Other	0	0	0	0	0	0
	- - - Other:
7214.20.41	- - - - Of a kind used for concrete reinforcement (rebars)	0	0	0	0	0	0
7214.20.49	- - - - Other	0	0	0	0	0	0
	- - Other:
	- - - Of circular cross-section:
7214.20.51	- - - - Of a kind used for concrete reinforcement (rebars)	0	0	0	0	0	0
7214.20.59	- - - - Other	0	0	0	0	0	0
	- - - Other:
7214.20.61	- - - - Of a kind used for concrete reinforcement (rebars)	0	0	0	0	0	0
7214.20.69	- - - - Other	0	0	0	0	0	0
7214.30	- Other, of free-cutting steel:
7214.30.10	- - Of circular cross-section	0	0	0	0	0	0
7214.30.90	- - Other	0	0	0	0	0	0
	- Other:
7214.91	- - Of rectangular (other than square) cross-section:
	- - - Containing by weight less than 0.6% of carbon:
7214.91.11	- - - - Containing by weight 0.38% or more of carbon and less than 1.15% of manganese	0	0	0	0	0	0
7214.91.12	- - - - Containing by weight 0.17% or more but not more than 0.46% of carbon and 1.2% or more but less than 1.65% of manganese	0	0	0	0	0	0
7214.91.19	- - - - Other	0	0	0	0	0	0
7214.91.20	- - - Containing by weight 0.6% or more of carbon	0	0	0	0	0	0
7214.99	- - Other:
	- - - Containing by weight 0.6% or more of carbon, other than of circular cross-section:
7214.99.11	- - - - Containing by weight less than 1.15% of manganese	0	0	0	0	0	0
7214.99.19	- - - - Other	0	0	0	0	0	0
	- - - Other:
7214.99.91	- - - - Containing by weight less than 0.38% of carbon, not more than 0.05% of phosphorus and not more than 0.05% of sulphur	0	0	0	0	0	0
7214.99.92	- - - - Containing by weight 0.38% or more of carbon and less than 1.15% of manganese	0	0	0	0	0	0
7214.99.93	- - - - Containing by weight 0.17% or more but less than 0.46% of carbon and 1.2% or more but less than 1.65% of manganese	0	0	0	0	0	0
7214.99.99	- - - - Other	0	0	0	0	0	0
72.15	Other bars and rods of iron or non-alloy steel
7215.10	- Of free-cutting steel, not further worked than cold-formed or cold-finished:
7215.10.10	- - Of circular cross-section	0	0	0	0	0	0
7215.10.90	- - Other	0	0	0	0	0	0
7215.50	- Other, not further worked than cold-formed or cold-finished:
7215.50.10	- - Containing by weight 0.6% or more of carbon, other than of circular cross-section	0	0	0	0	0	0
	- - Other:
7215.50.91	- - - Of a kind used for concrete reinforcement (rebars)	0	0	0	0	0	0
7215.50.99	- - - Other	0	0	0	0	0	0
7215.90	- Other:
7215.90.10	- - Of a kind used for concrete reinforcement (rebars)	0	0	0	0	0	0
	- - Other:
7215.90.91	- - - Of circular cross-section	0	0	0	0	0	0
7215.90.99	- - - Other	0	0	0	0	0	0
72.16	Angles, shapes and sections of iron or non-alloy steel
7216.10.00	- U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm	0	0	0	0	0	0
	- L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm:
7216.21	- - L sections:
7216.21.10	- - - Containing by weight less than 0.6% of carbon	0	0	0	0	0	0
7216.21.90	- - - Other	0	0	0	0	0	0
7216.22.00	- - T sections	0	0	0	0	0	0
	- U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more:
7216.31	- - U sections:
7216.31.10	- - - Containing by weight 0.6% or more of carbon	0	0	0	0	0	0
7216.31.90	- - - Other	0	0	0	0	0	0
7216.32	- - I sections:
7216.32.10	- - - Of a thickness of 5 mm or less	0	0	0	0	0	0
7216.32.90	- - - Other	0	0	0	0	0	0
7216.33	- - H sections:
	- - - Containing by weight less than 0.6% of carbon:
7216.33.11	- - - - Thickness of the flange not less than thickness of the web	0	0	0	0	0	0
7216.33.19	- - - - Other	0	0	0	0	0	0
7216.33.90	- - - Other	0	0	0	0	0	0
7216.40	- L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more:
7216.40.10	- - Containing by weight 0.6% or more of carbon	0	0	0	0	0	0
7216.40.90	- - Other	0	0	0	0	0	0
7216.50	- Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded:
	- - Of a height of less than 80 mm:
7216.50.11	- - - Containing by weight 0.6% or more of carbon	0	0	0	0	0	0
7216.50.19	- - - Other	0	0	0	0	0	0
	- - Other:
7216.50.91	- - - Containing by weight 0.6% or more of carbon	0	0	0	0	0	0
7216.50.99	- - - Other	0	0	0	0	0	0
	- Angles, shapes and sections, not further worked than cold-formed or cold-finished:
7216.61.00	- - Obtained from flat-rolled products	*	*	*	*	*	*
7216.69.00	- - Other	0	0	0	0	0	0
	- Other:
7216.91	- - Cold-formed or cold-finished from flat-rolled products:
7216.91.10	- - - Angles, other than slotted angles, containing by weight 0.6% or more of carbon	*	*	*	*	*	*
7216.91.90	- - - Other	*	*	*	*	*	*
7216.99.00	- - Other	0	0	0	0	0	0
72.17	Wire of iron or non-alloy steel
7217.10	- Not plated or coated, whether or not polished:
7217.10.10	- - Containing by weight less than 0.25% of carbon	0	0	0	0	0	0
	- - Containing by weight 0.25% or more but less than 0.6% of carbon:
7217.10.22	- - - Reed wire; wire of a kind used for making strands for prestressing concrete; free-cutting steel wire	0	0	0	0	0	0
7217.10.29	- - - Other	0	0	0	0	0	0
	- - Containing by weight 0.6% or more of carbon:
7217.10.32	- - - Spokes wire; reed wire; free-cutting steel wire	0	0	0	0	0	0
7217.10.33	- - - Wire of a kind used for making strands for prestressing concrete	0	0	0	0	0	0
7217.10.39	- - - Other	0	0	0	0	0	0
7217.20	- Plated or coated with zinc:
7217.20.10	- - Containing by weight less than 0.25% of carbon	0	0	0	0	0	0
7217.20.20	- - Containing by weight 0.25% or more of carbon but less than 0.45% of carbon	0	0	0	0	0	0
	- - Containing by weight 0.45% or more of carbon:
7217.20.91	- - - Steel core wire of a kind used for steel reinforced aluminium conductors (ACSR)	0	0	0	0	0	0
7217.20.99	- - - Other	0	0	0	0	0	0
7217.30	- Plated or coated with other base metals:
	- - Containing by weight less than 0.25% of carbon:
7217.30.11	- - - Plated or coated with tin	0	0	0	0	0	0
7217.30.19	- - - Other	0	0	0	0	0	0
7217.30.20	- - Containing by weight 0.25% or more of carbon but less than 0.6% of carbon	0	0	0	0	0	0
	- - Containing by weight 0.6% or more of carbon:
7217.30.33	- - - Brass coated steel wire of a kind used in the manufacture of pneumatic rubber tyres	0	0	0	0	0	0
7217.30.34	- - - Other copper alloy coated steel wire of a kind used in the manufacture of pneumatic rubber tyres	0	0	0	0	0	0
7217.30.35	- - - Other, plated or coated with tin	0	0	0	0	0	0
7217.30.39	- - - Other	0	0	0	0	0	0
7217.90	- Other:
7217.90.10	- - Containing by weight less than 0.25% of carbon	0	0	0	0	0	0
7217.90.90	- - Other	0	0	0	0	0	0
72.18	Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
7218.10.00	- Ingots and other primary forms	0	0	0	0	0	0
	- Other:
7218.91.00	- - Of rectangular (other than square) cross-section	0	0	0	0	0	0
7218.99.00	- - Other	0	0	0	0	0	0
72.19	Flat-rolled products of stainless steel, of a width of 600 mm or more
	- Not further worked than hot-rolled, in coils:
7219.11.00	- - Of a thickness exceeding 10 mm	0	0	0	0	0	0
7219.12.00	- - Of a thickness of 4.75 mm or more but not exceeding 10 mm	0	0	0	0	0	0
7219.13.00	- - Of a thickness of 3 mm or more but less than 4.75 mm	0	0	0	0	0	0
7219.14.00	- - Of a thickness of less than 3 mm	0	0	0	0	0	0
	- Not further worked than hot-rolled, not in coils:
7219.21.00	- - Of a thickness exceeding 10 mm	0	0	0	0	0	0
7219.22.00	- - Of a thickness of 4.75 mm or more but not exceeding 10 mm	0	0	0	0	0	0
7219.23.00	- - Of a thickness of 3 mm or more but less than 4.75 mm	0	0	0	0	0	0
7219.24.00	- - Of a thickness of less than 3 mm	0	0	0	0	0	0
	- Not further worked than cold-rolled (cold-reduced):
7219.31.00	- - Of a thickness of 4.75 mm or more	0	0	0	0	0	0
7219.32.00	- - Of a thickness of 3 mm or more but less than 4.75 mm	0	0	0	0	0	0
7219.33.00	- - Of a thickness exceeding 1 mm but less than 3 mm	0	0	0	0	0	0
7219.34.00	- - Of a thickness of 0.5 mm or more but not exceeding 1 mm	0	0	0	0	0	0
7219.35.00	- - Of a thickness of less than 0.5 mm	0	0	0	0	0	0
7219.90.00	- Other	0	0	0	0	0	0
72.20	Flat-rolled products of stainless steel, of a width of less than 600 mm
	- Not further worked than hot-rolled:
7220.11	- - Of a thickness of 4.75 mm or more:
7220.11.10	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7220.11.90	- - - Other	0	0	0	0	0	0
7220.12	- - Of a thickness of less than 4.75 mm:
7220.12.10	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7220.12.90	- - - Other	0	0	0	0	0	0
7220.20	- Not further worked than cold-rolled (cold-reduced):
7220.20.10	- - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7220.20.90	- - Other	0	0	0	0	0	0
7220.90	- Other:
7220.90.10	- - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7220.90.90	- - Other	0	0	0	0	0	0
7221.00.00	Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel	0	0	0	0	0	0
72.22	Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
	- Bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7222.11.00	- - Of circular cross-section	0	0	0	0	0	0
7222.19.00	- - Other	0	0	0	0	0	0
7222.20	- Bars and rods, not further worked than cold-formed or cold-finished:
7222.20.10	- - Of circular cross-section	0	0	0	0	0	0
7222.20.90	- - Other	0	0	0	0	0	0
7222.30	- Other bars and rods:
7222.30.10	- - Of circular cross-section	0	0	0	0	0	0
7222.30.90	- - Other	0	0	0	0	0	0
7222.40	- Angles, shapes and sections:
7222.40.10	- - Not further worked than hot-rolled, hot-drawn or extruded	0	0	0	0	0	0
7222.40.90	- - Other	0	0	0	0	0	0
72.23	Wire of stainless steel
7223.00.10	- Of cross-section exceeding 13 mm	0	0	0	0	0	0
7223.00.90	- Other	0	0	0	0	0	0
72.24	Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
7224.10.00	- Ingots and other primary forms	0	0	0	0	0	0
7224.90.00	- Other	0	0	0	0	0	0
72.25	Flat-rolled products of other alloy steel, of a width of 600 mm or more
	- Of silicon-electrical steel:
7225.11.00	- - Grain-oriented	0	0	0	0	0	0
7225.19.00	- - Other	0	0	0	0	0	0
7225.30	- Other, not further worked than hot-rolled, in coils:
7225.30.10	- - Of high speed steel	0	0	0	0	0	0
7225.30.90	- - Other	0	0	0	0	0	0
7225.40	- Other, not further worked than hot-rolled, not in coils:
7225.40.10	- - Of high speed steel	0	0	0	0	0	0
7225.40.90	- - Other	0	0	0	0	0	0
7225.50	- Other, not further worked than cold-rolled (cold-reduced):
7225.50.10	- - Of high speed steel	0	0	0	0	0	0
7225.50.90	- - Other	0	0	0	0	0	0
	- Other:
7225.91	- - Electrolytically plated or coated with zinc:
7225.91.10	- - - Of high speed steel	0	0	0	0	0	0
7225.91.90	- - - Other	0	0	0	0	0	0
7225.92	- - Otherwise plated or coated with zinc:
7225.92.10	- - - Of high speed steel	0	0	0	0	0	0
7225.92.20	- - - Other, plated or coated with zinc-aluminium-magnesium alloys	0	0	0	0	0	0
7225.92.90	- - - Other	0	0	0	0	0	0
7225.99	- - Other:
7225.99.10	- - - Of high speed steel	0	0	0	0	0	0
7225.99.90	- - - Other	0	0	0	0	0	0
72.26	Flat-rolled products of other alloy steel, of a width of less than 600 mm
	- Of silicon-electrical steel:
7226.11	- - Grain-oriented:
7226.11.10	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7226.11.90	- - - Other	0	0	0	0	0	0
7226.19	- - Other:
7226.19.10	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7226.19.90	- - - Other	0	0	0	0	0	0
7226.20	- Of high speed steel:
7226.20.10	- - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7226.20.90	- - Other	0	0	0	0	0	0
	- Other:
7226.91	- - Not further worked than hot-rolled:
7226.91.10	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7226.91.90	- - - Other	0	0	0	0	0	0
7226.92	- - Not further worked than cold-rolled (cold-reduced):
7226.92.10	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7226.92.90	- - - Other	0	0	0	0	0	0
7226.99	- - Other:
	- - - In the form of strips and bands, of a width not exceeding 400 mm:
7226.99.11	- - - - Plated or coated with zinc	0	0	0	0	0	0
7226.99.19	- - - - Other	0	0	0	0	0	0
	- - - Other:
7226.99.91	- - - - Plated or coated with zinc	0	0	0	0	0	0
7226.99.99	- - - - Other	0	0	0	0	0	0
72.27	Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
7227.10.00	- Of high speed steel	0	0	0	0	0	0
7227.20.00	- Of silico-manganese steel	0	0	0	0	0	0
7227.90	- Other:
7227.90.10	- - Containing by weight 0.5% or more of chromium	0	0	0	0	0	0
7227.90.90	- - Other	0	0	0	0	0	0
72.28	Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
7228.10	- Bars and rods, of high speed steel:
7228.10.10	- - Of circular cross-section	0	0	0	0	0	0
7228.10.90	- - Other	0	0	0	0	0	0
7228.20	- Bars and rods, of silico-manganese steel:
	- - Of circular cross-section:
7228.20.11	- - - Not further worked than hot-rolled, hot-drawn or extruded	0	0	0	0	0	0
7228.20.19	- - - Other	0	0	0	0	0	0
	- - Other:
7228.20.91	- - - Not further worked than hot-rolled, hot - drawn or extruded	0	0	0	0	0	0
7228.20.99	- - - Other	0	0	0	0	0	0
7228.30	- Other bars and rods, not further worked than hot - rolled, hot -drawn or extruded:
7228.30.10	- - Of circular cross-section	0	0	0	0	0	0
7228.30.90	- - Other	0	0	0	0	0	0
7228.40	- Other bars and rods, not further worked than forged:
7228.40.10	- - Of circular cross-section	0	0	0	0	0	0
7228.40.90	- - Other	0	0	0	0	0	0
7228.50	- Other bars and rods, not further worked than cold-formed or cold-finished:
7228.50.10	- - Of circular cross-section	0	0	0	0	0	0
7228.50.90	- - Other	0	0	0	0	0	0
7228.60	- Other bars and rods:
7228.60.10	- - Of circular cross-section	0	0	0	0	0	0
7228.60.90	- - Other	0	0	0	0	0	0
7228.70	- Angles, shapes and sections:
7228.70.10	- - Not further worked than hot-rolled, hot-drawn or extruded	0	0	0	0	0	0
7228.70.90	- - Other	0	0	0	0	0	0
7228.80	- Hollow drill bars and rods:
	- - Containing by weight 0.6% or more of carbon:
7228.80.11	- - - Of circular cross-section	0	0	0	0	0	0
7228.80.19	- - - Other	0	0	0	0	0	0
7228.80.90	- - Other	0	0	0	0	0	0
72.29	Wire of other alloy steel
7229.20.00	- Of silico-manganese steel	0	0	0	0	0	0
7229.90	- Other:
	- - Of cross-section not exceeding 5.5 mm:
7229.90.21	- - - Containing by weight 0.5% or more of chromium	0	0	0	0	0	0
7229.90.29	- - - Other	0	0	0	0	0	0
7229.90.30	- - Other, of high speed steel	0	0	0	0	0	0
	- - Other:
7229.90.91	- - - Containing by weight 0.5% or more of chromium	0	0	0	0	0	0
7229.90.99	- - - Other	0	0	0	0	0	0

This digitised text is for reference, and its formatting may differ slightly from the original. For legal purposes, please verify against the attached original or the Official Gazette. The authoritative text is in Vietnamese.