Appendix D Tariff schedule RCEP for Japan

Attached to Decree No. 129/2022/ND-CP

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97

Chapter 72 — Iron and steel

600 rows

Commodity code	Description of goods	RCEP rate (%)
Commodity code	Description of goods	2022	2023	2024	2025	2026	2027
	Chapter 72
	Iron and steel
72.01	Pig iron and, spiegeleisen in pigs, blocks or other primary forms
7201.10.00	- Non-alloy pig iron containing by weight 0.5% or less of phosphorus	0	0	0	0	0	0
7201.20.00	- Non-alloy pig iron containing by weight more than 0.5% of phosphorus	0	0	0	0	0	0
7201.50.00	- Alloy pig iron; spiegeleisen	0	0	0	0	0	0
72.02	Ferro-alloys
	- Ferro-manganese:
7202.11.00	- - Containing by weight more than 2% of carbon	0	0	0	0	0	0
7202.19.00	- - Other	0	0	0	0	0	0
	- Ferro-silicon:
7202.21.00	- - Containing by weight more than 55% of silicon	0	0	0	0	0	0
7202.29.00	- - Other	0	0	0	0	0	0
7202.30.00	- Ferro-silico-manganese	0	0	0	0	0	0
	- Ferro-chromium:
7202.41.00	- - Containing by weight more than 4% of carbon	0	0	0	0	0	0
7202.49.00	- - Other	0	0	0	0	0	0
7202.50.00	- Ferro-silico-chromium	0	0	0	0	0	0
7202.60.00	- Ferro-nickel	0	0	0	0	0	0
7202.70.00	- Ferro-molybdenum	0	0	0	0	0	0
7202.80.00	- Ferro-tungsten and ferro-silico-tungsten	0	0	0	0	0	0
	- Other:
7202.91.00	- - Ferro-titanium and ferro-silico-titanium	0	0	0	0	0	0
7202.92.00	- - Ferro-vanadium	0	0	0	0	0	0
7202.93.00	- - Ferro-niobium	0	0	0	0	0	0
7202.99.00	- - Other	0	0	0	0	0	0
72.03	Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms
7203.10.00	- Ferrous products obtained by direct reduction of iron ore	0	0	0	0	0	0
7203.90.00	- Other	0	0	0	0	0	0
72.04	Ferrous waste and scrap; remelting scrap ingots of iron or steel
7204.10.00	- Waste and scrap of cast iron	0	0	0	0	0	0
	- Waste and scrap of alloy steel:
7204.21.00	- - Of stainless steel	0	0	0	0	0	0
7204.29.00	- - Other	0	0	0	0	0	0
7204.30.00	- Waste and scrap of tinned iron or steel	0	0	0	0	0	0
	- Other waste and scrap:
7204.41.00	- - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles	0	0	0	0	0	0
7204.49.00	- - Other	0	0	0	0	0	0
7204.50.00	- Remelting scrap ingots	0	0	0	0	0	0
72.05	Granules and powders, of pig iron, spiegeleisen, iron or steel
7205.10.00	- Granules	0	0	0	0	0	0
	- Powders:
7205.21.00	- - Of alloy steel	0	0	0	0	0	0
7205.29.00	- - Other	0	0	0	0	0	0
72.06	Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03)
7206.10	- Ingots:
7206.10.10	- - Containing by weight more than 0.6% of carbon	0	0	0	0	0	0
7206.10.90	- - Other	0	0	0	0	0	0
7206.90.00	- Other	0	0	0	0	0	0
72.07	Semi-finished products of iron or non-alloy steel
	- Containing by weight less than 0.25% of carbon:
7207.11.00	- - Of rectangular (including square) cross-section, the width measuring less than twice the thickness	*	*	*	*	*	*
7207.12	- - Other, of rectangular (other than square) cross-section:
7207.12.10	- - - Slabs	0	0	0	0	0	0
7207.12.90	- - - Other	6.4	5.7	5.1	4.5	3.8	3.2
7207.19.00	- - Other	9	9	9	9	9	9
7207.20	- Containing by weight 0.25% or more of carbon:
	- - Containing by weight less than 0.6% of carbon:
7207.20.10	- - - Slabs	0	0	0	0	0	0
	- - - Other:
7207.20.21	- - - - Blocks roughly shaped by forging; sheet bars	0	0	0	0	0	0
7207.20.29	- - - - Other	*	*	*	*	*	*
	- - Other:
7207.20.91	- - - Slabs	0	0	0	0	0	0
	- - - Other:
7207.20.92	- - - - Blocks roughly shaped by forging; sheet bars	0	0	0	0	0	0
7207.20.99	- - - - Other	9	9	9	9	9	9
72.08	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
7208.10.00	- In coils, not further worked than hot-rolled, with patterns in relief	0	0	0	0	0	0
	- Other, in coils, not further worked than hot-rolled, pickled:
7208.25.00	- - Of a thickness of 4.75 mm or more	0	0	0	0	0	0
7208.26.00	- - Of a thickness of 3 mm or more but less than 4.75 mm	0	0	0	0	0	0
7208.27	- - Of a thickness of less than 3 mm:
	- - - Of a thickness of less than 2 mm:
7208.27.11	- - - - Containing by weight 0.6% or more of carbon	0	0	0	0	0	0
7208.27.19	- - - - Other	0	0	0	0	0	0
	- - - Other:
7208.27.91	- - - - Containing by weight 0.6% or more of carbon	0	0	0	0	0	0
7208.27.99	- - - - Other	0	0	0	0	0	0
	- Other, in coils, not further worked than hot-rolled:
7208.36.00	- - Of a thickness exceeding 10 mm	0	0	0	0	0	0
7208.37.00	- - Of a thickness of 4.75 mm or more but not exceeding 10 mm	0	0	0	0	0	0
7208.38.00	- - Of a thickness of 3 mm or more but less than 4.75 mm	0	0	0	0	0	0
7208.39	- - Of a thickness of less than 3 mm:
7208.39.10	- - - Containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less	0	0	0	0	0	0
7208.39.20	- - - Containing by weight less than 0.6% of carbon and of a thickness more than 0.17 mm but not exceeding 1.5 mm	0	0	0	0	0	0
7208.39.30	- - - Containing by weight 0.6% or more of carbon and of a thickness not exceeding 1.5 mm	0	0	0	0	0	0
7208.39.40	- - - Of a thickness more than 2 mm, maximum tensile strength of 550 Mpa and of a width not exceeding 1,250 mm	0	0	0	0	0	0
7208.39.90	- - - Other	0	0	0	0	0	0
7208.40.00	- Not in coils, not further worked than hot-rolled, with patterns in relief	0	0	0	0	0	0
	- Other, not in coils, not further worked than hot-rolled:
7208.51.00	- - Of a thickness exceeding 10 mm	0	0	0	0	0	0
7208.52.00	- - Of a thickness of 4.75 mm or more but not exceeding 10 mm	0	0	0	0	0	0
7208.53.00	- - Of a thickness of 3 mm or more but less than 4.75 mm	0	0	0	0	0	0
7208.54	- - Of a thickness of less than 3 mm:
7208.54.10	- - - Containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less	0	0	0	0	0	0
7208.54.90	- - - Other	0	0	0	0	0	0
7208.90	- Other:
7208.90.10	- - Corrugated	0	0	0	0	0	0
7208.90.20	- - Other, containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less	0	0	0	0	0	0
7208.90.90	- - Other	0	0	0	0	0	0
72.09	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold-reduced), not clad, plated or coated
	- In coils, not further worked than cold-rolled (cold-reduced):
7209.15.00	- - Of a thickness of 3 mm or more	6.4	5.7	5.1	4.5	3.8	3.2
7209.16	- - Of a thickness exceeding 1 mm but less than 3 mm:
7209.16.10	- - - Of a width not exceeding 1,250 mm	*	*	*	*	*	*
7209.16.90	- - - Other	*	*	*	*	*	*
7209.17	- - Of a thickness of 0.5 mm or more but not exceeding 1 mm:
7209.17.10	- - - Of a width not exceeding 1,250 mm	*	*	*	*	*	*
7209.17.90	- - - Other	*	*	*	*	*	*
7209.18	- - Of a thickness of less than 0.5 mm:
7209.18.10	- - - Tin-mill blackplate	0	0	0	0	0	0
	- - - Other:
7209.18.91	- - - - Containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less	*	*	*	*	*	*
7209.18.99	- - - - Other	*	*	*	*	*	*
	- Not in coils, not further worked than cold-rolled (cold-reduced):
7209.25.00	- - Of a thickness of 3 mm or more	6.4	5.7	5.1	4.5	3.8	3.2
7209.26	- - Of a thickness exceeding 1 mm but less than 3 mm:
7209.26.10	- - - Of a width not exceeding 1,250 mm	*	*	*	*	*	*
7209.26.90	- - - Other	*	*	*	*	*	*
7209.27	- - Of a thickness of 0.5 mm or more but not exceeding 1 mm:
7209.27.10	- - - Of a width not exceeding 1,250 mm	*	*	*	*	*	*
7209.27.90	- - - Other	*	*	*	*	*	*
7209.28	- - Of a thickness of less than 0.5 mm:
7209.28.10	- - - Containing by weight less than 0.6% of carbon and of a thickness of 0.17 mm or less	*	*	*	*	*	*
7209.28.90	- - - Other	*	*	*	*	*	*
7209.90	- Other:
7209.90.10	- - Corrugated	6.4	5.7	5.1	4.5	3.8	3.2
7209.90.90	- - Other	6.4	5.7	5.1	4.5	3.8	3.2
72.10	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated
	- Plated or coated with tin:
7210.11	- - Of a thickness of 0.5 mm or more:
7210.11.10	- - - Containing by weight 0.6% or more of carbon	4.5	4.1	3.6	3.2	2.7	2.3
7210.11.90	- - - Other	4.5	4.1	3.6	3.2	2.7	2.3
7210.12	- - Of a thickness of less than 0.5 mm:
7210.12.10	- - - Containing by weight 0.6% or more of carbon	4.5	4.1	3.6	3.2	2.7	2.3
7210.12.90	- - - Other	4.5	4.1	3.6	3.2	2.7	2.3
7210.20	- Plated or coated with lead, including terne-plate:
7210.20.10	- - Containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less	0	0	0	0	0	0
7210.20.90	- - Other	0	0	0	0	0	0
7210.30	- Electrolytically plated or coated with zinc:
	- - Containing by weight less than 0.6% of carbon:
7210.30.11	- - - Of a thickness not exceeding 1.2 mm	9.1	8.2	7.3	6.4	5.5	4.5
7210.30.12	- - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm	4.5	4.1	3.6	3.2	2.7	2.3
7210.30.19	- - - Other	*	*	*	*	*	*
	- - Other:
7210.30.91	- - - Of a thickness not exceeding 1.2 mm	9.1	8.2	7.3	6.4	5.5	4.5
7210.30.99	- - - Other	*	*	*	*	*	*
	- Otherwise plated or coated with zinc:
7210.41	- - Corrugated:
	- - - Containing by weight less than 0.6% of carbon:
7210.41.11	- - - - Of a thickness not exceeding 1.2 mm	*	*	*	*	*	*
7210.41.12	- - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm	9.1	8.2	7.3	6.4	5.5	4.5
7210.41.19	- - - - Other	9.1	8.2	7.3	6.4	5.5	4.5
	- - - Other:
7210.41.91	- - - - Of a thickness not exceeding 1.2 mm	*	*	*	*	*	*
7210.41.99	- - - - Other	9.1	8.2	7.3	6.4	5.5	4.5
7210.49	- - Other:
	- - - Containing by weight less than 0.6% of carbon:
7210.49.11	- - - - Coated with zinc by the iron-zinc alloyed coating method, containing by weight less than 0.04% of carbon and of a thickness not exceeding 1.2 mm	0	0	0	0	0	0
7210.49.14	- - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness not exceeding 1.2 mm	*	*	*	*	*	*
7210.49.15	- - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness exceeding 1.2 mm but not exceeding 1.5 mm	10	10	10	10	10	10
7210.49.16	- - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness exceeding 1.5 mm	9.1	8.2	7.3	6.4	5.5	4.5
7210.49.17	- - - - Other, of a thickness not exceeding 1.2 mm	*	*	*	*	*	*
7210.49.18	- - - - Other, of a thickness exceeding 1.2 mm but not exceeding 1.5 mm	10	10	10	10	10	10
7210.49.19	- - - - Other	9.1	8.2	7.3	6.4	5.5	4.5
	- - - Other:
7210.49.91	- - - - Of a thickness not exceeding 1.2 mm	*	*	*	*	*	*
7210.49.99	- - - - Other	9.1	8.2	7.3	6.4	5.5	4.5
7210.50.00	- Plated or coated with chromium oxides or with chromium and chromium oxides	*	*	*	*	*	*
	- Plated or coated with aluminium:
7210.61	- - Plated or coated with aluminium-zinc alloys:
	- - - Containing by weight less than 0.6% of carbon:
7210.61.11	- - - - Of a thickness not exceeding 1.2 mm	*	*	*	*	*	*
7210.61.12	- - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm	9.1	8.2	7.3	6.4	5.5	4.5
7210.61.19	- - - - Other	9.1	8.2	7.3	6.4	5.5	4.5
	- - - Other:
7210.61.91	- - - - Of a thickness not exceeding 1.2 mm	*	*	*	*	*	*
7210.61.92	- - - - Other, corrugated	9.1	8.2	7.3	6.4	5.5	4.5
7210.61.99	- - - - Other	9.1	8.2	7.3	6.4	5.5	4.5
7210.69	- - Other:
	- - - Containing by weight less than 0.6% of carbon:
7210.69.11	- - - - Of a thickness not exceeding 1.2 mm	*	*	*	*	*	*
7210.69.19	- - - - Other	9.1	8.2	7.3	6.4	5.5	4.5
	- - - Other:
7210.69.91	- - - - Of a thickness not exceeding 1.2 mm	*	*	*	*	*	*
7210.69.99	- - - - Other	9.1	8.2	7.3	6.4	5.5	4.5
7210.70	- Painted, varnished or coated with plastics:
	- - Containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less:
7210.70.12	- - - Painted after coating with zinc	5	5	5	5	5	5
7210.70.13	- - - Painted after coating with aluminium-zinc alloys	5	5	5	5	5	5
7210.70.19	- - - Other	5	5	5	5	5	5
	- - Other, containing by weight less than 0.6% of carbon:
7210.70.21	- - - Painted	0	0	0	0	0	0
7210.70.29	- - - Other	0	0	0	0	0	0
	- - Other:
7210.70.91	- - - Painted	0	0	0	0	0	0
7210.70.99	- - - Other	0	0	0	0	0	0
7210.90	- Other:
7210.90.10	- - Containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less	5	5	5	5	5	5
7210.90.90	- - Other	5	5	5	5	5	5
72.11	Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated
	- Not further worked than hot-rolled:
7211.13	- - Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief:
	- - - Containing by weight less than 0.6% of carbon:
7211.13.12	- - - - Corrugated	0	0	0	0	0	0
7211.13.13	- - - - Hoop and strip	0	0	0	0	0	0
7211.13.14	- - - - Universal plates	0	0	0	0	0	0
7211.13.19	- - - - Other	0	0	0	0	0	0
	- - - Other:
7211.13.92	- - - - Hoop and strip	0	0	0	0	0	0
7211.13.93	- - - - Universal plates	0	0	0	0	0	0
7211.13.99	- - - - Other	0	0	0	0	0	0
7211.14	- - Other, of a thickness of 4.75 mm or more:
	- - - Containing by weight less than 0.6% of carbon:
7211.14.14	- - - - Corrugated	0	0	0	0	0	0
7211.14.15	- - - - Coils for re-rolling	0	0	0	0	0	0
7211.14.16	- - - - Hoop and strip	0	0	0	0	0	0
7211.14.17	- - - - Universal plates	0	0	0	0	0	0
7211.14.19	- - - - Other	0	0	0	0	0	0
	- - - Other:
7211.14.94	- - - - Hoop and strip	0	0	0	0	0	0
7211.14.95	- - - - Universal plates	0	0	0	0	0	0
7211.14.99	- - - - Other	0	0	0	0	0	0
7211.19	- - Other:
	- - - Containing by weight less than 0.6% of carbon:
7211.19.13	- - - - Hoop and strip; universal plates	0	0	0	0	0	0
7211.19.14	- - - - Corrugated	4.5	4.1	3.6	3.2	2.7	2.3
7211.19.19	- - - - Other	0	0	0	0	0	0
	- - - Other:
7211.19.91	- - - - Hoop and strip; universal plates	0	0	0	0	0	0
7211.19.99	- - - - Other	0	0	0	0	0	0
	- Not further worked than cold-rolled (cold-reduced):
7211.23	- - Containing by weight less than 0.25% of carbon:
7211.23.10	- - - Corrugated	4.7	4.4	4.1	3.8	3.4	3.1
7211.23.20	- - - Hoop and strip, of a width not exceeding 400 mm	6.6	6.1	5.7	5.3	4.8	4.4
7211.23.30	- - - Other, of a thickness of 0.17 mm or less	4.7	4.4	4.1	3.8	3.4	3.1
7211.23.90	- - - Other	6.6	6.1	5.7	5.3	4.8	4.4
7211.29	- - Other:
7211.29.10	- - - Corrugated	4.7	4.4	4.1	3.8	3.4	3.1
7211.29.20	- - - Hoop and strip, of a width not exceeding 400 mm	6.6	6.1	5.7	5.3	4.8	4.4
7211.29.30	- - - Other, of a thickness of 0.17 mm or less	4.7	4.4	4.1	3.8	3.4	3.1
7211.29.90	- - - Other	6.6	6.1	5.7	5.3	4.8	4.4
7211.90	- Other:
	- - Containing by weight less than 0.6% of carbon:
7211.90.11	- - - Hoop and strip, of a width not exceeding 25 mm	6.6	6.1	5.7	5.3	4.8	4.4
7211.90.12	- - - Hoop and strip, of a width exceeding 400 mm
7211.90.12.10	- - - Other, of a thickness of 0.17 mm or less	4.7	4.4	4.1	3.8	3.4	3.1
7211.90.12.90	- - - - Other	6.6	6.1	5.7	5.3	4.8	4.4
7211.90.13	- - - Corrugated	4.7	4.4	4.1	3.8	3.4	3.1
7211.90.14	- - - Other, of a thickness of 0.17 mm or less
7211.90.14.10	- - - - In strips, of a width not exceeding 400 mm	6.6	6.1	5.7	5.3	4.8	4.4
7211.90.14.90	- - - - Other	4.7	4.4	4.1	3.8	3.4	3.1
7211.90.19	- - - Other	6.6	6.1	5.7	5.3	4.8	4.4
	- - Other:
7211.90.91	- - - Of a thickness of 0.17 mm or less
7211.90.91.10	- - - - In strips, of a width not exceeding 400 mm	6.6	6.1	5.7	5.3	4.8	4.4
7211.90.91.90	- - - - Other	4.7	4.4	4.1	3.8	3.4	3.1
7211.90.99	- - - Other	6.6	6.1	5.7	5.3	4.8	4.4
72.12	Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated
7212.10	- Plated or coated with tin:
	- - Containing by weight less than 0.6% of carbon:
7212.10.11	- - - Hoop and strip, of a width not exceeding 25 mm	5	5	5	5	5	5
7212.10.14	- - - Hoop and strip, of a width exceeding 400 mm	5	5	5	5	5	5
7212.10.19	- - - Other	5	5	5	5	5	5
	- - Other:
7212.10.94	- - - Hoop and strip, of a width not exceeding 400 mm	5	5	5	5	5	5
7212.10.99	- - - Other	7	7	7	7	7	7
7212.20	- Electrolytically plated or coated with zinc:
7212.20.10	- - Hoop and strip, of a width not exceeding 400 mm	7	7	7	7	7	7
7212.20.20	- - Other, containing by weight less than 0.6% of carbon and of a thickness of 1.5 mm or less	7	7	7	7	7	7
7212.20.90	- - Other	7	7	7	7	7	7
7212.30	- Otherwise plated or coated with zinc:
	- - Containing by weight less than 0.6% of carbon:
7212.30.11	- - - Hoop and strip, of a width not exceeding 25 mm	10	10	10	10	10	10
7212.30.12	- - - Hoop and strip, of a width exceeding 25 mm and not exceeding 400 mm	10	10	10	10	10	10
7212.30.13	- - - Other, of a thickness of 1.5 mm or less	10	10	10	10	10	10
7212.30.14	- - - Other, coated with zinc by the iron-zinc alloy coating method, containing by weight less than 0.04% of carbon	0	0	0	0	0	0
7212.30.19	- - - Other	10	10	10	10	10	10
7212.30.90	- - Other	10	10	10	10	10	10
7212.40	- Painted, varnished or coated with plastics:
	- - Containing by weight less than 0.6% of carbon:
7212.40.11	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7212.40.12	- - - Other hoop and strip	7	7	7	7	7	7
7212.40.13	- - - Other, painted after coating with zinc	7	7	7	7	7	7
7212.40.14	- - - Other, painted after coating with aluminium-zinc alloys	7	7	7	7	7	7
7212.40.19	- - - Other	7	7	7	7	7	7
	- - Other:
7212.40.91	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7212.40.99	- - - Other	7	7	7	7	7	7
7212.50	- Otherwise plated or coated:
	- - Plated or coated with chromium oxides or with chromium and chromium oxides:
7212.50.14	- - - Hoop and strip, of a width exceeding 25 mm; universal plates	0	0	0	0	0	0
7212.50.19	- - - Other	0	0	0	0	0	0
	- - Plated or coated with aluminium-zinc alloys:
7212.50.23	- - - Hoop and strip, of a width not exceeding 25 mm	10	10	10	10	10	10
7212.50.24	- - - Other hoop and strip; universal plates	10	10	10	10	10	10
7212.50.29	- - - Other	10	10	10	10	10	10
	- - Other:
7212.50.93	- - - Hoop and strip, of a width not exceeding 25 mm	0	0	0	0	0	0
7212.50.94	- - - Other hoop and strip; universal plates	0	0	0	0	0	0
7212.50.99	- - - Other	0	0	0	0	0	0
7212.60	- Clad:
	- - Containing by weight less than 0.6% of carbon:
7212.60.11	- - - Hoop and strip	0	0	0	0	0	0
7212.60.12	- - - Other, of a thickness of 1.5 mm or less	0	0	0	0	0	0
7212.60.19	- - - Other	0	0	0	0	0	0
	- - Other:
7212.60.91	- - - Hoop and strip	0	0	0	0	0	0
7212.60.99	- - - Other	0	0	0	0	0	0
72.13	Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
7213.10	- Containing indentations, ribs, grooves or other deformations produced during the rolling process:
7213.10.10	- - Of circular cross-section measuring not exceeding 50 mm in diameter	15	15	15	15	15	15
7213.10.90	- - Other	15	15	15	15	15	15
7213.20.00	- Other, of free-cutting steel	0	0	0	0	0	0
	- Other:
7213.91	- - Of circular cross-section measuring less than 14 mm in diameter:
7213.91.10	- - - Of a kind used for producing soldering sticks	7	7	7	7	7	7
7213.91.20	- - - Of a kind used for concrete reinforcement (rebars)	20	20	20	20	20	20
7213.91.30	- - - Other, containing by weight 0.6% or more of carbon, not more than 0.03% of phosphorus and not more than 0.035% of sulphur	0	0	0	0	0	0
7213.91.90	- - - Other	0	0	0	0	0	0
7213.99	- - Other:
7213.99.10	- - - Of a kind used for producing soldering sticks	4.5	4.1	3.6	3.2	2.7	2.3
7213.99.20	- - - Of a kind used for concrete reinforcement (rebars)	15	15	15	15	15	15
7213.99.90	- - - Other	3	3	3	3	3	3
72.14	Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
7214.10	- Forged:
	- - Containing by weight less than 0.6% of carbon:
7214.10.11	- - - Of circular cross-section	0	0	0	0	0	0
7214.10.19	- - - Other	0	0	0	0	0	0
	- - Other:
7214.10.21	- - - Of circular cross-section	0	0	0	0	0	0
7214.10.29	- - - Other	0	0	0	0	0	0
7214.20	- Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling:
	- - Containing by weight less than 0.6% of carbon:
	- - - Of circular cross-section:
7214.20.31	- - - - Of a kind used for concrete reinforcement (rebars)	*	*	*	*	*	*
7214.20.39	- - - - Other	0	0	0	0	0	0
	- - - Other:
7214.20.41	- - - - Of a kind used for concrete reinforcement (rebars)	15	15	15	15	15	15
7214.20.49	- - - - Other	0	0	0	0	0	0
	- - Other:
	- - - Of circular cross-section:
7214.20.51	- - - - Of a kind used for concrete reinforcement (rebars)	15	15	15	15	15	15
7214.20.59	- - - - Other	0	0	0	0	0	0
	- - - Other:
7214.20.61	- - - - Of a kind used for concrete reinforcement (rebars)	15	15	15	15	15	15
7214.20.69	- - - - Other	0	0	0	0	0	0
7214.30	- Other, of free-cutting steel:
7214.30.10	- - Of circular cross-section	0	0	0	0	0	0
7214.30.90	- - Other	0	0	0	0	0	0
	- Other:
7214.91	- - Of rectangular (other than square) cross-section:
	- - - Containing by weight less than 0.6% of carbon:
7214.91.11	- - - - Containing by weight 0.38% or more of carbon and less than 1.15% of manganese	0	0	0	0	0	0
7214.91.12	- - - - Containing by weight 0.17% or more but not more than 0.46% of carbon and 1.2% or more but less than 1.65% of manganese	0	0	0	0	0	0
7214.91.19	- - - - Other	0	0	0	0	0	0
7214.91.20	- - - Containing by weight 0.6% or more of carbon	0	0	0	0	0	0
7214.99	- - Other:
	- - - Containing by weight 0.6% or more of carbon, other than of circular cross-section:
7214.99.11	- - - - Containing by weight less than 1.15% of manganese	0	0	0	0	0	0
7214.99.19	- - - - Other	0	0	0	0	0	0
	- - - Other:
7214.99.91	- - - - Containing by weight less than 0.38% of carbon, not more than 0.05% of phosphorus and not more than 0.05% of sulphur	0	0	0	0	0	0
7214.99.92	- - - - Containing by weight 0.38% or more of carbon and less than 1.15% of manganese	0	0	0	0	0	0
7214.99.93	- - - - Containing by weight 0.17% or more but less than 0.46% of carbon and 1.2% or more but less than 1.65% of manganese	0	0	0	0	0	0
7214.99.99	- - - - Other	0	0	0	0	0	0
72.15	Other bars and rods of iron or non-alloy steel
7215.10	- Of free-cutting steel, not further worked than cold-formed or cold-finished:
7215.10.10	- - Of circular cross-section	0	0	0	0	0	0
7215.10.90	- - Other	0	0	0	0	0	0
7215.50	- Other, not further worked than cold-formed or cold-finished:
7215.50.10	- - Containing by weight 0.6% or more of carbon, other than of circular cross-section	0	0	0	0	0	0
	- - Other:
7215.50.91	- - - Of a kind used for concrete reinforcement (rebars)	18.2	16.4	14.5	12.7	10.9	9.1
7215.50.99	- - - Other	0	0	0	0	0	0
7215.90	- Other:
7215.90.10	- - Of a kind used for concrete reinforcement (rebars)	13.6	12.3	10.9	9.5	8.2	6.8
	- - Other:
7215.90.91	- - - Of circular cross-section	0	0	0	0	0	0
7215.90.99	- - - Other	0	0	0	0	0	0
72.16	Angles, shapes and sections of iron or non-alloy steel
7216.10.00	- U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm	12	12	12	12	12	12
	- L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm:
7216.21	- - L sections:
7216.21.10	- - - Containing by weight less than 0.6% of carbon	12	12	12	12	12	12
7216.21.90	- - - Other	12	12	12	12	12	12
7216.22.00	- - T sections	10	10	10	10	10	10
	- U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded of a height of 80 mm or more:
7216.31	- - U sections:
7216.31.10	- - - Containing by weight 0.6% or more of carbon	12	12	12	12	12	12
7216.31.90	- - - Other	12	12	12	12	12	12
7216.32	- - I sections:
7216.32.10	- - - Of a thickness of 5 mm or less	12	12	12	12	12	12
7216.32.90	- - - Other	12	12	12	12	12	12
7216.33	- - H sections:
	- - - Containing by weight less than 0.6% of carbon:
7216.33.11	- - - - Thickness of the flange not less than thickness of the web	10.9	9.8	8.7	7.6	6.5	5.5
7216.33.19	- - - - Other	10.9	9.8	8.7	7.6	6.5	5.5
7216.33.90	- - - Other	10.9	9.8	8.7	7.6	6.5	5.5
7216.40	- L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more:
7216.40.10	- - Containing by weight 0.6% or more of carbon	12	12	12	12	12	12
7216.40.90	- - Other	12	12	12	12	12	12
7216.50	- Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded:
	- - Of a height of less than 80 mm:
7216.50.11	- - - Containing by weight 0.6% or more of carbon	13.6	12.3	10.9	9.5	8.2	6.8
7216.50.19	- - - Other	13.6	12.3	10.9	9.5	8.2	6.8
	- - Other:
7216.50.91	- - - Containing by weight 0.6% or more of carbon	13.6	12.3	10.9	9.5	8.2	6.8
7216.50.99	- - - Other	13.6	12.3	10.9	9.5	8.2	6.8
	- Angles, shapes and sections, not further worked than cold-formed or cold-finished:
7216.61.00	- - Obtained from flat-rolled products	9.1	8.2	7.3	6.4	5.5	4.5
7216.69.00	- - Other	13.6	12.3	10.9	9.5	8.2	6.8
	- Other:
7216.91	- - Cold-formed or cold-finished from flat-rolled products:
7216.91.10	- - - Angles, other than slotted angles, containing by weight 0.6% or more of carbon	9.1	8.2	7.3	6.4	5.5	4.5
7216.91.90	- - - Other	9.1	8.2	7.3	6.4	5.5	4.5
7216.99.00	- - Other	10.9	9.8	8.7	7.6	6.5	5.5
72.17	Wire of iron or non-alloy steel
7217.10	- Not plated or coated, whether or not polished:
7217.10.10	- - Containing by weight less than 0.25% of carbon	13.6	12.3	10.9	9.5	8.2	6.8
	- - Containing by weight 0.25% or more but less than 0.6% of carbon:
7217.10.22	- - - Reed wire; wire of a kind used for making strands for prestressing concrete; free-cutting steel wire	0	0	0	0	0	0
7217.10.29	- - - Other	10	10	10	10	10	10
	- - Containing by weight 0.6% or more of carbon:
7217.10.32	- - - Spokes wire; reed wire; free-cutting steel wire	0	0	0	0	0	0
7217.10.33	- - - Wire of a kind used for making strands for prestressing concrete	0	0	0	0	0	0
7217.10.39	- - - Other	3	3	3	3	3	3
7217.20	- Plated or coated with zinc:
7217.20.10	- - Containing by weight less than 0.25% of carbon	13.6	12.3	10.9	9.5	8.2	6.8
7217.20.20	- - Containing by weight 0.25% or more of carbon but less than 0.45% of carbon	5	5	5	5	5	5
	- - Containing by weight 0.45% or more of carbon:
7217.20.91	- - - Steel core wire of a kind used for steel reinforced aluminium conductors (ACSR)	0	0	0	0	0	0
7217.20.99	- - - Other	5	5	5	5	5	5
7217.30	- Plated or coated with other base metals:
	- - Containing by weight less than 0.25% of carbon:
7217.30.11	- - - Plated or coated with tin	9.1	8.2	7.3	6.4	5.5	4.5
7217.30.19	- - - Other	13.6	12.3	10.9	9.5	8.2	6.8
7217.30.20	- - Containing by weight 0.25% or more of carbon but less than 0.6% of carbon	5	5	5	5	5	5
	- - Containing by weight 0.6% or more of carbon:
7217.30.33	- - - Brass coated steel wire of a kind used in the manufacture of pneumatic rubber tyres	0	0	0	0	0	0
7217.30.34	- - - Other copper alloy coated steel wire of a kind used in the manufacture of pneumatic rubber tyres	0	0	0	0	0	0
7217.30.35	- - - Other, plated or coated with tin	5	5	5	5	5	5
7217.30.39	- - - Other	5	5	5	5	5	5
7217.90	- Other:
7217.90.10	- - Containing by weight less than 0.25% of carbon	10	10	10	10	10	10
7217.90.90	- - Other	5	5	5	5	5	5
72.18	Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
7218.10.00	- Ingots and other primary forms	0	0	0	0	0	0
	- Other:
7218.91.00	- - Of rectangular (other than square) cross-section	0	0	0	0	0	0
7218.99.00	- - Other	0	0	0	0	0	0
72.19	Flat-rolled products of stainless steel, of a width of 600 mm or more
	- Not further worked than hot-rolled, in coils:
7219.11.00	- - Of a thickness exceeding 10 mm	0	0	0	0	0	0
7219.12.00	- - Of a thickness of 4.75 mm or more but not exceeding 10 mm	0	0	0	0	0	0
7219.13.00	- - Of a thickness of 3 mm or more but less than 4.75 mm	0	0	0	0	0	0
7219.14.00	- - Of a thickness of less than 3 mm	0	0	0	0	0	0
	- Not further worked than hot-rolled, not in coils:
7219.21.00	- - Of a thickness exceeding 10 mm	0	0	0	0	0	0
7219.22.00	- - Of a thickness of 4.75 mm or more but not exceeding 10 mm	0	0	0	0	0	0
7219.23.00	- - Of a thickness of 3 mm or more but less than 4.75 mm	0	0	0	0	0	0
7219.24.00	- - Of a thickness of less than 3 mm	0	0	0	0	0	0
	- Not further worked than cold-rolled (cold-reduced):
7219.31.00	- - Of a thickness of 4.75 mm or more	0	0	0	0	0	0
7219.32.00	- - Of a thickness of 3 mm or more but less than 4.75 mm	0	0	0	0	0	0
7219.33.00	- - Of a thickness exceeding 1 mm but less than 3 mm	9.1	8.2	7.3	6.4	5.5	4.5
7219.34.00	- - Of a thickness of 0.5 mm or more but not exceeding 1 mm	9.1	8.2	7.3	6.4	5.5	4.5
7219.35.00	- - Of a thickness of less than 0.5 mm	9.1	8.2	7.3	6.4	5.5	4.5
7219.90.00	- Other	0	0	0	0	0	0
72.20	Flat-rolled products of stainless steel, of a width of less than 600 mm
	- Not further worked than hot-rolled:
7220.11	- - Of a thickness of 4.75 mm or more:
7220.11.10	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7220.11.90	- - - Other	0	0	0	0	0	0
7220.12	- - Of a thickness of less than 4.75 mm:
7220.12.10	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7220.12.90	- - - Other	0	0	0	0	0	0
7220.20	- Not further worked than cold-rolled (cold-reduced):
7220.20.10	- - Hoop and strip, of a width not exceeding 400 mm	9.1	8.2	7.3	6.4	5.5	4.5
7220.20.90	- - Other	9.1	8.2	7.3	6.4	5.5	4.5
7220.90	- Other:
7220.90.10	- - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7220.90.90	- - Other	0	0	0	0	0	0
7221.00.00	Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel	0	0	0	0	0	0
72.22	Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
	- Bars and rods, not further worked than hot-rolled, hot-drawn or extruded:
7222.11.00	- - Of circular cross-section	0	0	0	0	0	0
7222.19.00	- - Other	0	0	0	0	0	0
7222.20	- Bars and rods, not further worked than cold-formed or cold-finished:
7222.20.10	- - Of circular cross-section	9.1	8.2	7.3	6.4	5.5	4.5
7222.20.90	- - Other	9.1	8.2	7.3	6.4	5.5	4.5
7222.30	- Other bars and rods:
7222.30.10	- - Of circular cross-section	9.1	8.2	7.3	6.4	5.5	4.5
7222.30.90	- - Other	9.1	8.2	7.3	6.4	5.5	4.5
7222.40	- Angles, shapes and sections:
7222.40.10	- - Not further worked than hot-rolled, hot-drawn or extruded	0	0	0	0	0	0
7222.40.90	- - Other	0	0	0	0	0	0
72.23	Wire of stainless steel
7223.00.10	- Of cross-section exceeding 13 mm	9.1	8.2	7.3	6.4	5.5	4.5
7223.00.90	- Other	9.1	8.2	7.3	6.4	5.5	4.5
72.24	Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
7224.10.00	- Ingots and other primary forms	0	0	0	0	0	0
7224.90.00	- Other	0	0	0	0	0	0
72.25	Flat-rolled products of other alloy steel, of a width of 600 mm or more
	- Of silicon-electrical steel:
7225.11.00	- - Grain-oriented	0	0	0	0	0	0
7225.19.00	- - Other	0	0	0	0	0	0
7225.30	- Other, not further worked than hot-rolled, in coils:
7225.30.10	- - Of high speed steel	0	0	0	0	0	0
7225.30.90	- - Other	0	0	0	0	0	0
7225.40	- Other, not further worked than hot-rolled, not in coils:
7225.40.10	- - Of high speed steel	0	0	0	0	0	0
7225.40.90	- - Other	0	0	0	0	0	0
7225.50	- Other, not further worked than cold-rolled (cold-reduced):
7225.50.10	- - Of high speed steel	0	0	0	0	0	0
7225.50.90	- - Other	0	0	0	0	0	0
	- Other:
7225.91	- - Electrolytically plated or coated with zinc:
7225.91.10	- - - Of high speed steel	0	0	0	0	0	0
7225.91.90	- - - Other	0	0	0	0	0	0
7225.92	- - Otherwise plated or coated with zinc:
7225.92.10	- - - Of high speed steel	0	0	0	0	0	0
7225.92.20	- - - Other, plated or coated with zinc-aluminium-magnesium alloys	0	0	0	0	0	0
7225.92.90	- - - Other	0	0	0	0	0	0
7225.99	- - Other:
7225.99.10	- - - Of high speed steel	0	0	0	0	0	0
7225.99.90	- - - Other	0	0	0	0	0	0
72.26	Flat-rolled products of other alloy steel, of a width of less than 600 mm
	- Of silicon-electrical steel:
7226.11	- - Grain-oriented:
7226.11.10	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7226.11.90	- - - Other	0	0	0	0	0	0
7226.19	- - Other:
7226.19.10	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7226.19.90	- - - Other	0	0	0	0	0	0
7226.20	- Of high speed steel:
7226.20.10	- - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7226.20.90	- - Other	0	0	0	0	0	0
	- Other:
7226.91	- - Not further worked than hot-rolled:
7226.91.10	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7226.91.90	- - - Other	0	0	0	0	0	0
7226.92	- - Not further worked than cold-rolled (cold-reduced):
7226.92.10	- - - Hoop and strip, of a width not exceeding 400 mm	0	0	0	0	0	0
7226.92.90	- - - Other	0	0	0	0	0	0
7226.99	- - Other:
	- - - In the form of strips and bands, of a width not exceeding 400 mm:
7226.99.11	- - - - Plated or coated with zinc	0	0	0	0	0	0
7226.99.19	- - - - Other	0	0	0	0	0	0
	- - - Other:
7226.99.91	- - - - Plated or coated with zinc	0	0	0	0	0	0
7226.99.99	- - - - Other	0	0	0	0	0	0
72.27	Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
7227.10.00	- Of high speed steel	0	0	0	0	0	0
7227.20.00	- Of silico-manganese steel	0	0	0	0	0	0
7227.90	- Other:
7227.90.10	- - Containing by weight 0.5% or more of chromium	0	0	0	0	0	0
7227.90.90	- - Other	0	0	0	0	0	0
72.28	Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
7228.10	- Bars and rods, of high speed steel:
7228.10.10	- - Of circular cross-section	0	0	0	0	0	0
7228.10.90	- - Other	0	0	0	0	0	0
7228.20	- Bars and rods, of silico-manganese steel:
	- - Of circular cross-section:
7228.20.11	- - - Not further worked than hot-rolled, hot-drawn or extruded	0	0	0	0	0	0
7228.20.19	- - - Other	0	0	0	0	0	0
	- - Other:
7228.20.91	- - - Not further worked than hot-rolled, hot - drawn or extruded	0	0	0	0	0	0
7228.20.99	- - - Other	0	0	0	0	0	0
7228.30	- Other bars and rods, not further worked than hot - rolled, hot -drawn or extruded:
7228.30.10	- - Of circular cross-section	0	0	0	0	0	0
7228.30.90	- - Other	0	0	0	0	0	0
7228.40	- Other bars and rods, not further worked than forged:
7228.40.10	- - Of circular cross-section	0	0	0	0	0	0
7228.40.90	- - Other	0	0	0	0	0	0
7228.50	- Other bars and rods, not further worked than cold-formed or cold-finished:
7228.50.10	- - Of circular cross-section	0	0	0	0	0	0
7228.50.90	- - Other	0	0	0	0	0	0
7228.60	- Other bars and rods:
7228.60.10	- - Of circular cross-section	0	0	0	0	0	0
7228.60.90	- - Other	0	0	0	0	0	0
7228.70	- Angles, shapes and sections:
7228.70.10	- - Not further worked than hot-rolled, hot-drawn or extruded	0	0	0	0	0	0
7228.70.90	- - Other	0	0	0	0	0	0
7228.80	- Hollow drill bars and rods:
	- - Containing by weight 0.6% or more of carbon:
7228.80.11	- - - Of circular cross-section	0	0	0	0	0	0
7228.80.19	- - - Other	0	0	0	0	0	0
7228.80.90	- - Other	0	0	0	0	0	0
72.29	Wire of other alloy steel
7229.20.00	- Of silico-manganese steel	0	0	0	0	0	0
7229.90	- Other:
	- - Of cross-section not exceeding 5.5 mm:
7229.90.21	- - - Containing by weight 0.5% or more of chromium	0	0	0	0	0	0
7229.90.29	- - - Other	0	0	0	0	0	0
7229.90.30	- - Other, of high speed steel	0	0	0	0	0	0
	- - Other:
7229.90.91	- - - Containing by weight 0.5% or more of chromium	0	0	0	0	0	0
7229.90.99	- - - Other	0	0	0	0	0	0

Digitised for reference; formatting may differ slightly from the original — verify against the attached original file or the official gazette. Vietnamese legal text.