Builders’ joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes › Windows, French-windows and their frames
4418.19.00 — Other
Loại khác
Unit: kg/chiếc (kg/unit)
HS code 44181900 covers other under heading 4418 (builders’ joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes), Chapter 44. The MFN import duty is 5%; the lowest FTA rate is 0% under ASEAN - China (ACFTA) (C/O form E required). VAT: 8/10%. Unit of quantity: kg/unit.
MFN import duty
5%
Lowest FTA
0%
ASEAN - China (ACFTA)
VAT
8/10%
Excise / Env. tax
—
Not subject
Import duty comparison across FTA schedules
Full table with legal documents & effective dates
| Tax / Schedule | Rate | Document | Effective |
|---|---|---|---|
| Preferential import duty (MFN) | 5% | 26/2023/NĐ-CP | 15/07/2023 |
| Ordinary import duty | 7.5% | 15/2023/QĐ-TTg | 15/07/2023 |
| ASEAN (ATIGA)(2026) | 0% | 126/2022/NĐ-CP | 30/12/2022 |
| ASEAN - China (ACFTA) | 0% | 118/2022/NĐ-CP | 30/12/2022 |
| ASEAN - Japan (AJCEP)(01/04/2026 - 31/3/2027) | 0% | 120/2022/NĐ-CP | 30/12/2022 |
| Vietnam - Japan (VJEPA)(1/4/2026 - 31/3/2027) | 0% | 124/2022/NĐ-CP | 30/12/2022 |
| ASEAN - Korea (AKFTA) | 0% | 119/2022/NĐ-CP | 30/12/2022 |
| ASEAN - Australia/New Zealand (AANZFTA) | 0% | 121/2022/NĐ-CP | 30/12/2022 |
| ASEAN - India (AIFTA)(01/01/2026 - 31/12/2026) | 0% | 122/2022/NĐ-CP | 30/12/2022 |
| Vietnam - Korea (VKFTA)(2026) | 0% | 125/2022/NĐ-CP | 30/12/2022 |
| Vietnam - Chile (VCFTA)(2026) | 0% | 112/2022/NĐ-CP | 30/12/2022 |
| Vietnam - Eurasian Economic Union (VN-EAEU)(2026) | 0% | 113/2022/NĐ-CP | 30/12/2022 |
| CPTPP Agreement(2026) | 0% | 115/2022/NĐ-CP | 30/12/2022 |
| ASEAN - Hong Kong (AHKFTA)(2026) | 0% | 123/2022/NĐ-CP | 30/12/2022 |
| Vietnam - EU (EVFTA)(2026) | 0% | 116/2022/NĐ-CP | 30/12/2022 |
| Vietnam - UK (UKVFTA)(2026) | 0% | 117/2022/NĐ-CP | 30/12/2022 |
| Vietnam - Laos | 0% | 206/2025/NĐ-CP | 15/07/2025 |
| Vietnam - Israel (VIFTA)(2026) | 2,9% | 131/2024/NĐ-CP | 15/10/2024 |
| RCEP - Group A (ASEAN)(2026) | 0% | 129/2022/NĐ-CP | 30/12/2022 |
| RCEP - Group B (China)(2026) | 0% | 129/2022/NĐ-CP | 30/12/2022 |
| RCEP - Group C (Korea)(2026) | 0% | 129/2022/NĐ-CP | 30/12/2022 |
| RCEP - Group D (Japan)(2026) | 0% | 129/2022/NĐ-CP | 30/12/2022 |
| RCEP - Group E (Australia)(2026) | 0% | 129/2022/NĐ-CP | 30/12/2022 |
| RCEP - Group F (New Zealand)(2026) | 0% | 129/2022/NĐ-CP | 30/12/2022 |
FTA schedules are cut annually: the rate shown applies to the period in brackets, per the decree's appendix.
VAT · Excise tax · Environmental protection tax
| Tax / Schedule | Rate | Document | Effective |
|---|---|---|---|
| Value added tax (VAT) | 8/10% | 181/2025/NĐ-CP | 01/07/2025 |
Export duty
| Tax / Schedule | Rate | Document | Effective |
|---|---|---|---|
| Export duty | 0% | 26/2023/NĐ-CP | 31/05/2023 |
Rules of origin by FTA
To claim an FTA rate the goods must meet the origin criterion below AND carry a valid C/O — the right HS code alone is not enough.
- - Other
RVC(40) or CTH
RVC(40) hoặc CTH
CTHRVC40
Source: 44/2025/TT-BCT · annex uses HS 2022 while this site uses AHTN 2022 — check headings that changed between versions
Builders’ joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes
CTH
CTH
Source: 37/2022/TT-BCT · annex uses HS 2017 while this site uses AHTN 2022 — check headings that changed between versions
- - Other
RVC40 or CTSH
RVC40 hoặc CTSH
CTSHRVC40
Source: 03/2023/TT-BCT · annex uses HS 2022 while this site uses AHTN 2022 — check headings that changed between versions
Builders’ joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes
CTH
CTH
Source: 03/2019/TT-BCT · annex uses HS 2012 while this site uses AHTN 2022 — check headings that changed between versions
– ván ghép và đồ mộc dùng trong xây dựng;
Sử dụng nguyên liệu từ bất kỳ Nhóm nào để sản xuất, ngoại trừ Nhóm của sản phẩm. Tuy nhiên, được phép sử dụng panen có lõi xốp và ván lợp.
– ván gỗ tạo gân và gờ dạng chuỗi hạt; và
Tạo gân hoặc tạo gờ dạng chuỗi hạt.
Source: 14/2026/TT-BCT
Builders’ joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes
CTH or RVC40
CTH hoặc RVC40
CTHRVC40
Source: 32/2022/TT-BCT · annex uses HS 2022 while this site uses AHTN 2022 — check headings that changed between versions
- ván ghép và đồ mộc dùng trong xây dựng;
Sản xuất từ nguyên liệu thuộc bất kỳ Nhóm nào, ngoại trừ Nhóm của sản phẩm. Tuy nhiên, được sử dụng panen có lõi xốp, ván ốp và ván lợp.
- ván gỗ có gân và gờ nổi làm viền; và
Tạo gân, gờ dạng chuỗi hạt.
Source: 02/2021/TT-BCT
Builders’ joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes
CTH
CTH
Source: 10/2009/TT-BCT
- - Other
CTH
CTH
Source: 01/2024/TT-BCT · annex uses HS 2022 while this site uses AHTN 2022 — check headings that changed between versions
Agreements with no rule specific to this code
This code carries a preferential rate under the agreements below but has no line of its own in the product-specific rules annex. The goods must still meet an origin requirement.
The agreement sets a general rule for codes outside the annex:
1. The goods referred to in Clause 3, Article 5 of this Circular, other than the goods provided in Clause 2 of this Article, are considered originating if:
a) The goods have a regional value content (RVC) of not less than 40% of the FOB value calculated in accordance with Article 8 of this Circular and the last production process is carried out in a Member State; or
b) Goods of Chapters 25, 26, 28, 29, 31 and 39; Chapters 42 to 49; Chapters 57 to 59; Chapters 61, 62 and 64; Chapters 66 to 71; Chapters 73 to 83; Chapters 86 and 88; and Chapters 91 to 97 of the Harmonized Commodity Description and Coding System using non-originating materials undergo a change in tariff classification at the 4-digit level (CTH), except for headings 29.01, 29.02, 31.05, 39.01, 39.02, 39.03, 39.07 and 39.08, to which the RVC 40% origin criterion applies.
CTHRVC40
Source: 12/2019/TT-BCT · Article 7(1)
The agreement sets a general rule for codes outside the annex:
1. The goods referred to in Clause 3, Article 5 of this Circular, other than the goods provided in Clause 2 of this Article, are considered originating if they have an RVC of not less than 40% calculated in accordance with Article 8 of this Circular.
Source: 21/2019/TT-BCT · Article 7(1)
The agreement sets a general rule for codes outside the annex:
1. Products referred to in Clause 2, Article 2 are considered originating if:
a) The AIFTA content is not less than thirty-five per cent (35%) of the FOB value; and
b) The non-originating materials used in the production of that product have undergone a change in tariff classification at the six (6)-digit level (CTSH) of the Harmonized System.
provided that the last production process is carried out in the territory of the exporting Member State.
CTSH
Source: 15/2010/TT-BCT · Article 4(1) of Appendix 1
The agreement sets a general rule for codes outside the annex:
1. For the purposes of point b clause 1 Article 5 of this Circular, goods not covered by Article 8 of this Circular shall be considered as originating if they have a regional value content (hereinafter referred to as RVC) of at least 40% of the FOB value, or if they have undergone a change in tariff classification at the 4-digit level (hereinafter referred to as CTH) of the Harmonized System.
CTH
Source: 49/2025/TT-BCT · Article 7(1)
The agreement sets a general rule for codes outside the annex:
1. For the purposes of Clause 2, Article 2, goods are considered originating in the Member State where the production or processing took place if:
a) The goods have a regional value content (RVC) of not less than forty per cent (40%), calculated in accordance with Article 5; or
b) All the non-originating materials used in the production of those goods undergo a change in tariff classification (hereinafter referred to as “CTC”) at the four (4)-digit level (that is, a change of heading) of the Harmonized System.
2. Each Member State shall allow the exporter to use either of the criteria provided at Point a, Clause 1 or Point b, Clause 1 of this Article to determine the origin of the goods.
CTC
Source: 31/2013/TT-BCT · Article 4(1)
The agreement sets NO general rule. Apart from wholly obtained goods and goods produced entirely from originating materials, the only route is to meet the annex — and no annex line matches this code, so check the circular itself:
1. For the purposes of Point b, Clause 1, Article 2 of this Appendix, goods that are not wholly obtained are considered originating if they satisfy the Product Specific Rules provided in Appendix II.
Source: 40/2015/TT-BCT · Article 4(1) of Appendix I
The agreement sets a general rule for codes outside the annex:
1. General origin criterion
a) Goods specified in Clause 2 of Article 2 shall be considered as originating in the Member State where the working or processing of those goods has taken place if:
- The goods have a regional value content (hereinafter referred to as the “Viet Nam - Laos value content” or the “regional value content (LVC)”) of not less than forty percent (40%), calculated in accordance with the formula provided in Article 5; or
- All non-originating materials used in the production of those goods have undergone a change in tariff classification (hereinafter referred to as “CTC”) at the four (4)-digit level (meaning a change of heading) of the Harmonized System.
b) Each Member State shall allow the exporter of the goods to decide to use either of the two criteria “LVC of not less than forty percent (40%)” or “change in tariff classification at the four (04)-digit level” referred to at point a of Clause 1 in order to determine the origin of the goods.
CTCLVC
Source: 04/2010/TT-BCT · Article 4(1) of Appendix 1
Criteria are quoted verbatim from the Vietnamese circular, not paraphrased.
Commodity policy for this HS code
Unofficial English rendering of the Vietnamese source; the document numbers link to the full text.
Managing authority: Ministry of Industry and Trade · Ministry of Agriculture and Environment
- Goods imported in the form of buying, selling, and exchange by border residents (42/2019/TT-BCT & 34/2025/TT-BCT )Listed· Ministry of Industry and Trade
- Goods that are specimens of endangered, precious, and rare forest plantsLicence· Ministry of Agriculture and Environment
- Plants listed in the CITES appendices (17/2023/TT-BNNPTNT)Licence· Ministry of Agriculture and Environment
- Wood and wood-processed products must have legal forest product documentation when exported (01/2024/TT-BNNPTNT M21)*Special procedure· Ministry of Agriculture and Environment
Related documents (full text)
Notes for Chapter 44 — Wood and articles of wood; wood charcoal
Notes
1. This Chapter does not cover:
(a) Wood, in chips, in shavings, crushed, ground or powdered, of a kind used primarily in perfumery, in pharmacy, or for insecticidal, fungicidal or similar purposes (heading 12.11);
(b) Bamboos or other materials of a woody nature of a kind used primarily for plaiting, in the rough, whether or not split, sawn lengthwise or cut to length (heading 14.01);
(c) Wood, in chips, in shavings, ground or powdered, of a kind used primarily in dyeing or in tanning (heading 14.04);
(d) Activated charcoal (heading 38.02);
(e) Articles of heading 42.02;
(f) Goods of Chapter 46;
(g) Footwear or parts thereof of Chapter 64;
(h) Goods of Chapter 66 (for example, umbrellas and walking-sticks and parts thereof);
(ij) Goods of heading 68.08;
(k) Imitation jewellery of heading 71.17;
(l) Goods of Section XVI or Section XVII (for example, machine parts, cases, covers, cabinets for machines and apparatus and wheelwrights’ wares);
(m) Goods of Section XVIII (for example, clock cases and musical instruments and parts thereof);
(n) Parts of firearms (heading 93.05);
(o) Articles of Chapter 94 (for example, furniture, luminaires and lighting fittings, prefabricated buildings);
(p) Articles of Chapter 95 (for example, toys, games, sports requisites);
(q) Articles of Chapter 96 (for example, smoking pipes and parts thereof, buttons, pencils, and monopods, bipods, tripods and similar articles) excluding bodies and handles, of wood, for articles of heading 96.03; or
(r) Articles of Chapter 97 (for example, works of art).
2. In this Chapter, the expression “densified wood” means wood which has been subjected to chemical or physical treatment (being, in the case of layers bonded together, treatment in excess of that needed to ensure a good bond), and which has thereby acquired increased density or hardness together with improved mechanical strength or resistance to chemical or electrical agencies.
3. Headings 44.14 to 44.21 apply to articles of the respective descriptions of particle board or similar board, fibreboard, laminated wood or densified wood as they apply to such articles of wood.
4. Products of heading 44.10, 44.11 or 44.12 may be worked to form the shapes provided for in respect of the goods of heading 44.09, curved, corrugated, perforated, cut or formed to shapes other than square or rectangular or submitted to any other operation provided it does not give them the character of articles of other headings.
5. Heading 44.17 does not apply to tools in which the blade, working edge, working surface or other working part is formed by any of the materials specified in Note 1 to Chapter 82.
6. Subject to Note 1 above and except where the context otherwise requires, any reference to “wood” in a heading of this Chapter applies also to bamboos and other materials of a woody nature.
Subheading Notes
1. For the purposes of subheading 4401.31, the expression “wood pellets” means by-products such as cutter shavings, sawdust or chips, of the mechanical wood processing industry, furniture-making industry or other wood transformation activities, which have been agglomerated either directly by compression or by the addition of a binder in a proportion not exceeding 3% by weight. Such pellets are cylindrical, with a diameter not exceeding 25 mm and a length not exceeding 100 mm.
2. For the purposes of subheading 4401.32, the expression “wood briquettes” means by-products such as cutter shavings, sawdust or chips, of the mechanical wood processing industry, furniture making or other wood transformation activities, which have been agglomerated either directly by compression or by addition of a binder in a proportion not exceeding 3% by weight. Such briquettes are in the form of cubiform, polyhedral or cylindrical units with the minimum cross-sectional dimension greater than 25 mm.
3. For the purposes of subheading 4407.13, “S-P-F” refers to wood sourced from mixed stands of spruce, pine and fir where the proportion of each species varies and is unknown.
4. For the purposes of subheading 4407.14, “Hem-fir” refers to wood sourced from mixed stands of Western hemlock and fir where the proportion of each species varies and is unknown.
Codes at the same level under “Windows, French-windows and their frames:”
Check neighbouring codes to make sure the classification fits best.
Data updated: 29/07/2026 · Found wrong or missing data? Report an issue for this code →