Watch cases and parts thereof

911110008-digit code

9111.10.00 — Cases of precious metal or of metal clad with precious metal

Vỏ đồng hồ bằng kim loại quý hoặc bằng kim loại dát phủ kim loại quý

Unit: unit (chiếc)

HS code 91111000 covers cases of precious metal or of metal clad with precious metal under heading 9111 (watch cases and parts thereof), Chapter 91. The MFN import duty is 20%; the lowest FTA rate is 0% under ASEAN - China (ACFTA) (C/O form E required). VAT: 8/10%. Unit of quantity: unit.

MFN import duty

20%

Lowest FTA

0%

ASEAN - China (ACFTA)

VAT

8/10%

8% under the current reduction · 10% standard

Excise / Env. tax

Not subject

Import duty comparison across FTA schedules

Full table with legal documents & effective dates
Tax / ScheduleRateDocumentEffective
Preferential import duty (MFN)20%26/2023/NĐ-CP15/07/2023
Ordinary import duty30%15/2023/QĐ-TTg15/07/2023
ASEAN (ATIGA)(2026)0%126/2022/NĐ-CP30/12/2022
ASEAN - China (ACFTA)0%118/2022/NĐ-CP30/12/2022
ASEAN - Japan (AJCEP)(01/04/2026 - 31/3/2027)0%120/2022/NĐ-CP30/12/2022
Vietnam - Japan (VJEPA)(1/4/2026 - 31/3/2027)0%124/2022/NĐ-CP30/12/2022
ASEAN - Korea (AKFTA)0%119/2022/NĐ-CP30/12/2022
ASEAN - Australia/New Zealand (AANZFTA)0%121/2022/NĐ-CP30/12/2022
ASEAN - India (AIFTA)(01/01/2026 - 31/12/2026)0%122/2022/NĐ-CP30/12/2022
Vietnam - Korea (VKFTA)(2026)0%125/2022/NĐ-CP30/12/2022
Vietnam - Chile (VCFTA)(2026)0%112/2022/NĐ-CP30/12/2022
Vietnam - Eurasian Economic Union (VN-EAEU)(2026)0%113/2022/NĐ-CP30/12/2022
CPTPP Agreement(2026)0%115/2022/NĐ-CP30/12/2022
ASEAN - Hong Kong (AHKFTA)(2026)4%123/2022/NĐ-CP30/12/2022
Vietnam - EU (EVFTA)(2026)0%116/2022/NĐ-CP30/12/2022
Vietnam - UK (UKVFTA)(2026)0%117/2022/NĐ-CP30/12/2022
Vietnam - Laos0%206/2025/NĐ-CP15/07/2025
Vietnam - Israel (VIFTA)(2026)14%131/2024/NĐ-CP15/10/2024
RCEP - Group A (ASEAN)(2026)10%129/2022/NĐ-CP30/12/2022
RCEP - Group B (China)(2026)10%129/2022/NĐ-CP30/12/2022
RCEP - Group C (Korea)(2026)10%129/2022/NĐ-CP30/12/2022
RCEP - Group D (Japan)(2026)10,9%129/2022/NĐ-CP30/12/2022
RCEP - Group E (Australia)(2026)10%129/2022/NĐ-CP30/12/2022
RCEP - Group F (New Zealand)(2026)10%129/2022/NĐ-CP30/12/2022

FTA schedules are cut annually: the rate shown applies to the period in brackets, per the decree's appendix.

FTA duty phase-down

Upcoming reductions for this code — the new rate takes effect on this site automatically on the effective date.

Only the steps present in the data (each schedule's next period) are shown. A schedule not reaching 0% here does not mean it stops — the full schedule is in the decree annex.

VAT · Excise tax · Environmental protection tax

Tax / ScheduleRateDocumentEffective
Value added tax (VAT)8/10%181/2025/NĐ-CP01/07/2025

Rules of origin by FTA

To claim an FTA rate the goods must meet the origin criterion below AND carry a valid C/O — the right HS code alone is not enough. Step-by-step self-check

AANZFTAC/O AANZRule set at subheading level 9111.10

- Cases of precious metal or of metal clad with precious metal

RVC(40) or CTSH

RVC(40) hoặc CTSH

CTSHRVC40

Source: Circular No. 44/2025/TT-BCT · annex uses HS 2022 while this site uses AHTN 2022 — check headings that changed between versions

ATIGAC/O DRule set at subheading level 9111.10

- Cases of precious metal or of metal clad with precious metal

RVC40 or CTSH

RVC40 hoặc CTSH

CTSHRVC40

Source: Circular No. 03/2023/TT-BCT · annex uses HS 2022 while this site uses AHTN 2022 — check headings that changed between versions

CPTPPC/O CPTPPRule set at subheading level 9111.10 - 9111.80

- Cases of precious metal or of metal clad with precious metal

CTH; hoặc RVC không thấp hơn: a) 35% theo công thức tính trực tiếp; hoặc b) 45% theo công thức tính gián tiếp; hoặc c) 55% theo công thức tính giá trị tập trung đối với nguyên liệu không có xuất xứ thuộc nhóm 91.11.

CTH

Source: Circular No. 03/2019/TT-BCT · annex uses HS 2012 while this site uses AHTN 2022 — check headings that changed between versions

EVFTAC/O EUR.1Rule set at chapter level Chapter 91

Clocks and watches and parts thereof

The value of the materials used does not exceed 70% of the ex-works price of the product.

Trị giá nguyên liệu được sử dụng không vượt quá 70% giá xuất xưởng của sản phẩm.

Source: Circular No. 14/2026/TT-BCT

RCEPC/O RCEPRule set at subheading level 9111.10

- Cases of precious metal or of metal clad with precious metal

CTSH or RVC40

CTSH hoặc RVC40

CTSHRVC40

Source: Circular No. 32/2022/TT-BCT · annex uses HS 2022 while this site uses AHTN 2022 — check headings that changed between versions

UKVFTAC/O EUR.1 (UK)Rule set at chapter level Chapter 91

Clocks and watches and parts thereof

The value of the materials does not exceed 70% of the ex-works price of the product.

Trị giá nguyên liệu không vượt quá 70% giá xuất xưởng của sản phẩm.

Source: Circular No. 02/2021/TT-BCT

VIFTAC/O VN-ILRule set at chapter level Chapter 91

Clocks and watches and parts thereof

CTH

CTH

CTH

or

50%

50%

Source: Circular No. 11/2024/TT-BCT

VJEPAC/O VJRule set at subheading level 9111.10

- Cases of precious metal or of metal clad with precious metal

LVC 40% or CTSH

LVC 40% hoặc CTSH

CTSHLVC

Source: Circular No. 10/2009/TT-BCT

VKFTAC/O KVRule set at subheading level 9111.10

- Cases of precious metal or of metal clad with precious metal

CTH or RVC(40)

CTH hoặc RVC(40)

CTHRVC40

Source: Circular No. 09/2022/TT-BCT · annex uses HS 2017 while this site uses AHTN 2022 — check headings that changed between versions

VN_EAEUC/O EAVRule set at subheading level 9111.10

- Cases of precious metal or of metal clad with precious metal

CTH

CTH

CTH

Source: Circular No. 01/2024/TT-BCT · annex uses HS 2022 while this site uses AHTN 2022 — check headings that changed between versions

VN_UAEC/O UAE-VNRule set at chapter level Chapter 91

Clocks and watches and parts thereof

CTH

CTH

CTH

or

QVC 35%

QVC 35%

QVC35

Source: Circular No. 24/2026/TT-BCT · annex uses HS 2022 while this site uses AHTN 2022 — check headings that changed between versions

Agreements with no rule specific to this code

This code carries a preferential rate under the agreements below but has no line of its own in the product-specific rules annex. The goods must still meet an origin requirement.

ACFTAC/O EGeneral rule applies

The agreement sets a general rule for codes outside the annex:

1. The goods referred to in Clause 3, Article 5 of this Circular, other than the goods provided in Clause 2 of this Article, are considered originating if:

a) The goods have a regional value content (RVC) of not less than 40% of the FOB value calculated in accordance with Article 8 of this Circular and the last production process is carried out in a Member State; or

b) Goods of Chapters 25, 26, 28, 29, 31 and 39; Chapters 42 to 49; Chapters 57 to 59; Chapters 61, 62 and 64; Chapters 66 to 71; Chapters 73 to 83; Chapters 86 and 88; and Chapters 91 to 97 of the Harmonized Commodity Description and Coding System using non-originating materials undergo a change in tariff classification at the 4-digit level (CTH), except for headings 29.01, 29.02, 31.05, 39.01, 39.02, 39.03, 39.07 and 39.08, to which the RVC 40% origin criterion applies.

CTHRVC40

Source: Circular No. 12/2019/TT-BCT · Article 7(1)

AHKFTAC/O AHKGeneral rule applies

The agreement sets a general rule for codes outside the annex:

1. The goods referred to in Clause 3, Article 5 of this Circular, other than the goods provided in Clause 2 of this Article, are considered originating if they have an RVC of not less than 40% calculated in accordance with Article 8 of this Circular.

Source: Circular No. 21/2019/TT-BCT · Article 7(1)

AIFTAC/O AIGeneral rule applies

The agreement sets a general rule for codes outside the annex:

1. Products referred to in Clause 2, Article 2 are considered originating if:

a) The AIFTA content is not less than thirty-five per cent (35%) of the FOB value; and

b) The non-originating materials used in the production of that product have undergone a change in tariff classification at the six (6)-digit level (CTSH) of the Harmonized System.

provided that the last production process is carried out in the territory of the exporting Member State.

CTSH

Source: Circular No. 15/2010/TT-BCT · Article 4(1) of Appendix 1

AJCEPC/O AJGeneral rule applies

The agreement sets a general rule for codes outside the annex:

1. For the purposes of paragraph 2 of Article 5 of this Circular, goods shall be considered as originating in a Member State in one of the following cases:

a) The Regional Value Content (RVC) is not less than 40%, calculated according to the formula provided for in Article 8 of this Circular, and the final process of production is performed in that Member State.

b) All non-originating materials used in the production of the goods have undergone a change in tariff classification (CTC) at the four (04)-digit level (change of Heading) of the Harmonized Commodity Description and Coding System in that Member State.

The exporter of each Member State may choose to apply the origin criterion provided for in point a or point b of paragraph 1 of this Article to determine the origin of goods.

CTC

Source: Circular No. 37/2022/TT-BCT · Article 7(1)

AKFTAC/O AKGeneral rule applies

The agreement sets a general rule for codes outside the annex:

1. For the purposes of point b clause 1 Article 5 of this Circular, goods not covered by Article 8 of this Circular shall be considered as originating if they have a regional value content (hereinafter referred to as RVC) of at least 40% of the FOB value, or if they have undergone a change in tariff classification at the 4-digit level (hereinafter referred to as CTH) of the Harmonized System.

CTH

Source: Circular No. 49/2025/TT-BCT · Article 7(1)

VCFTAC/O VCGeneral rule applies

The agreement sets a general rule for codes outside the annex:

1. For the purposes of Clause 2, Article 2, goods are considered originating in the Member State where the production or processing took place if:

a) The goods have a regional value content (RVC) of not less than forty per cent (40%), calculated in accordance with Article 5; or

b) All the non-originating materials used in the production of those goods undergo a change in tariff classification (hereinafter referred to as “CTC”) at the four (4)-digit level (that is, a change of heading) of the Harmonized System.

2. Each Member State shall allow the exporter to use either of the criteria provided at Point a, Clause 1 or Point b, Clause 1 of this Article to determine the origin of the goods.

CTC

Source: Circular No. 31/2013/TT-BCT · Article 4(1)

VN_LAOC/O SGeneral rule applies

The agreement sets a general rule for codes outside the annex:

1. General origin criterion

a) Goods specified in Clause 2 of Article 2 shall be considered as originating in the Member State where the working or processing of those goods has taken place if:

- The goods have a regional value content (hereinafter referred to as the “Viet Nam - Laos value content” or the “regional value content (LVC)”) of not less than forty percent (40%), calculated in accordance with the formula provided in Article 5; or

- All non-originating materials used in the production of those goods have undergone a change in tariff classification (hereinafter referred to as “CTC”) at the four (4)-digit level (meaning a change of heading) of the Harmonized System.

b) Each Member State shall allow the exporter of the goods to decide to use either of the two criteria “LVC of not less than forty percent (40%)” or “change in tariff classification at the four (04)-digit level” referred to at point a of Clause 1 in order to determine the origin of the goods.

CTCLVC

Source: Circular No. 04/2010/TT-BCT · Article 4(1) of Appendix 1

Criteria are translated for reference; the Vietnamese wording quoted underneath is the binding text.

Notes for Chapter 91 Clocks and watches and parts thereof

Notes

1. This Chapter does not cover:

(a) Clock or watch glasses or weights (classified according to their constituent material);

(b) Watch chains (heading 71.13 or 71.17, as the case may be);

(c) Parts of general use defined in Note 2 to Section XV, of base metal (Section XV), or similar goods of plastics (Chapter 39) or of precious metal or metal clad with precious metal (generally heading 71.15); clock or watch springs are, however, to be classified as clock or watch parts (heading 91.14);

(d) Bearing balls (heading 73.26 or 84.82, as the case may be);

(e) Articles of heading 84.12 constructed to work without an escapement;

(f) Ball bearings (heading 84.82); or

(g) Articles of Chapter 85, not yet assembled together or with other components into watch or clock movements or into articles suitable for use solely or principally as parts of such movements (Chapter 85).

2. Heading 91.01 covers only watches with case wholly of precious metal or of metal clad with precious metal, or of the same materials combined with natural or cultured pearls, or precious or semi-precious stones (natural, synthetic or reconstructed) of headings 71.01 to 71.04. Watches with case of base metal inlaid with precious metal fall in heading 91.02.

3. For the purposes of this Chapter, the expression “watch movements” means devices regulated by a balance-wheel and hairspring, quartz crystal or any other system capable of determining intervals of time, with a display or a system to which a mechanical display can be incorporated. Such watch movements shall not exceed 12 mm in thickness and 50 mm in width, length or diameter.

4. Except as provided in Note 1, movements and other parts suitable for use both in clocks or watches and in other articles (for example, precision instruments) are to be classified in this Chapter.

Vietnam trade in subheading 9111.10

Figures cover the whole 6-digit subheading 9111.10, not code 91111000 alone — UN Comtrade only publishes to 6 digits. Latest year available for Vietnam is 2023.

Imports

  • 2023719 USD

Top partners 2023

  • Sweden719 USD

Exports

  • 2021859 USD

Source: UN Comtrade (preview API) — reported by Vietnam. Partner totals are as reported and may differ from partner-country statistics.

Corresponding US tariff lines

Six digits are identical worldwide under the HS Convention, so 9111.10 is the same subheading in both schedules. What differs is how each country splits it: below are the 1 US line under 9111.10.

US HTS codeDescriptionGeneral duty
9111.10.00.00Cases of precious metal or of metal clad with precious metal(No.)12¢ each + 4.8%

Additional Chapter 99 duties apply to goods of Vietnam

  • 9903.02.69 +20%The duty provided in the applicable subheading + 20%
  • 9903.05.84 +12.5%The duty provided in the applicable subheading + 12.5%

These are added to the General duty above, not in place of it. Whether a given article falls inside their scope — and the exclusion lists — is set out in the U.S. notes to Chapter 99, which are prose and not machine-readable, so this site does not assign them per code. Check the official schedule before quoting a landed cost.

Already terminated: 9903.01.72 +46%

Selling to a US buyer? Screen the parties first — buyer, L/C bank and forwarder against the US restricted lists; a listed party can get the shipment held.

The General column is the rate for Vietnam: the Special column lists US preference programmes (GSP, USMCA, KORUS…) and Vietnam is in none of them. Source: USITC Harmonized Tariff Schedule of the United States — 2026 HTS Revision 18. For reference only — classification on import is decided by US Customs, and anti-dumping, countervailing and Section 232/301 measures are not covered here.

Corresponding Japanese tariff lines

9111.10 is the same subheading in both schedules (six digits are identical worldwide under the HS Convention). Vietnamese goods can enter Japan under four parallel preference routes — the columns below — and the exporter picks whichever C/O gives the better rate.

LineDescriptionMFNVJEPAAJCEPCPTPPRCEP
9111.10-000Cases of precious metal or of metal clad with precious metal(NO/KG)FreeFreeFreeFreeFree

MFN is the lowest of the schedule's General/Temporary/WTO columns (hover to see all three). The preference columns require the matching certificate of origin; an em dash means that agreement gives no preference for the line. Source: Japan's Tariff Schedule, Japan Customs (as of August 8, 2026). For reference only — classification on import is decided by Japan Customs.

Codes at the same level under 9111

Check neighbouring codes to make sure the classification fits best.

Data updated: 11/08/2026 · Found wrong or missing data? Report a data error