Appendix II — Preferential import tariff
Attached to Decree No. 26/2023/ND-CP
Download original (.docx)01020304050607080910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576787980818283848586878889909192939495969798
Section/Chapter notes
Articles of iron or steel
Notes.
1. In this Chapter the expression "cast iron" applies to products obtained by casting in which iron predominates by weight over each of the other elements and the chemical composition of which differs from that of steel as defined in Note 1 (d) to Chapter 72.
2. In this Chapter the word "wire" means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.
Chapter 73 — Articles of iron or steel
430 rows
| Commodity code | Description of goods | Duty rate (%) |
|---|---|---|
| 73.01 | Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel | |
| 7301.10.00 | - Sheet piling | 3 |
| 7301.20.00 | - Angles, shapes and sections | 5 |
| 73.02 | Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialized for jointing or fixing rails | |
| 7302.10.00 | - Rails | 3 |
| 7302.30.00 | - Switch blades, crossing frogs, point rods and other crossing pieces | 3 |
| 7302.40.00 | - Fish-plates and sole plates | 3 |
| 7302.90 | - Other: | |
| 7302.90.10 | - - Sleepers (cross-ties) | 3 |
| 7302.90.90 | - - Other | 3 |
| 73.03 | Tubes, pipes and hollow profiles, of cast iron | |
| - Tubes and pipes: | ||
| 7303.00.11 | - - Hubless tubes and pipes | 10 |
| 7303.00.19 | - - Other | 10 |
| - Other: | ||
| 7303.00.91 | - - With an external diameter not exceeding 100 mm | 3 |
| 7303.00.99 | - - Other | 3 |
| 73.04 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel | |
| - Line pipe of a kind used for oil or gas pipelines: | ||
| 7304.11.00 | - - Of stainless steel | 0 |
| 7304.19.00 | - - Other | 0 |
| - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: | ||
| 7304.22 | - - Drill pipe of stainless steel: | |
| 7304.22.10 | - - - With a yield strength less than 80,000 psi, without threaded end | 0 |
| 7304.22.90 | - - - Other | 0 |
| 7304.23 | - - Other drill pipe: | |
| 7304.23.10 | - - - With a yield strength less than 80,000 psi, without threaded end | 0 |
| 7304.23.90 | - - - Other | 0 |
| 7304.24 | - - Other, of stainless steel: | |
| 7304.24.10 | - - - Casing and tubing with a yield strength less than 80,000 psi, without threaded end | 5 |
| 7304.24.20 | - - - Casing and tubing with a yield strength less than 80,000 psi, with threaded end | 0 |
| 7304.24.30 | - - - Casing and tubing with a yield strength 80,000 psi or more, whether or not with threaded end | 0 |
| 7304.29 | - - Other: | |
| 7304.29.10 | - - - Casing and tubing with a yield strength less than 80,000 psi, without threaded end | 5 |
| 7304.29.20 | - - - Casing and tubing with a yield strength less than 80,000 psi, with threaded end | 0 |
| 7304.29.30 | - - - Casing and tubing with a yield strength 80,000 psi or more, whether or not with threaded end | 0 |
| - Other, of circular cross-section, of iron or non-alloy steel: | ||
| 7304.31 | - - Cold-drawn or cold-rolled (cold - reduced): | |
| 7304.31.10 | - - - Drillrod casing and tubing with pin and box threads | 5 |
| 7304.31.20 | - - - High-pressure pipe capable of withstanding a pressure of not less than 42,000 psi | 0 |
| 7304.31.40 | - - - Other, having an external diameter of less than 140 mm and containing less than 0.45% by weight of carbon | 10 |
| 7304.31.90 | - - - Other | 5 |
| 7304.39 | - - Other: | |
| 7304.39.20 | - - - High-pressure pipe capable of withstanding a pressure of not less than 42,000 psi | 0 |
| 7304.39.40 | - - - Other, having an external diameter of less than 140 mm and containing less than 0.45% by weight of carbon | 10 |
| 7304.39.90 | - - - Other | 5 |
| - Other, of circular cross-section, of stainless steel: | ||
| 7304.41.00 | - - Cold-drawn or cold-rolled (cold-reduced) | 0 |
| 7304.49.00 | - - Other | 0 |
| - Other, of circular cross-section, of other alloy steel: | ||
| 7304.51 | - - Cold-drawn or cold-rolled (cold-reduced): | |
| 7304.51.10 | - - - Drillrod casing and tubing with pin and box threads | 0 |
| 7304.51.20 | - - - High-pressure pipe with a yield strength not less than 42,000 psi | 0 |
| 7304.51.90 | - - - Other | 0 |
| 7304.59 | - - Other: | |
| 7304.59.10 | - - - High-pressure pipe with a yield strength not less than 42,000 psi | 0 |
| 7304.59.90 | - - - Other | 0 |
| 7304.90 | - Other: | |
| 7304.90.10 | - - High-pressure pipe with a yield strength not less than 42,000 psi | 0 |
| 7304.90.30 | - - Other, having an external diameter of less than 140 mm and containing less than 0.45% by weight of carbon | 10 |
| 7304.90.90 | - - Other | 5 |
| 73.05 | Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel | |
| - Line pipe of a kind used for oil or gas pipelines: | ||
| 7305.11.00 | - - Longitudinally submerged arc welded | 5 |
| 7305.12 | - - Other, longitudinally welded: | |
| 7305.12.10 | - - - Electric resistance welded (ERW) | 5 |
| 7305.12.90 | - - - Other | 5 |
| 7305.19 | - - Other: | |
| 7305.19.10 | - - - Spiral or helical submerged arc welded | 10 |
| 7305.19.90 | - - - Other | 10 |
| 7305.20.00 | - Casing of a kind used in drilling for oil or gas | 5 |
| - Other, welded: | ||
| 7305.31 | - - Longitudinally welded: | |
| 7305.31.10 | - - - Stainless steel pipes and tubes | 5 |
| 7305.31.90 | - - - Other | 5 |
| 7305.39 | - - Other: | |
| 7305.39.10 | - - - High-pressure pipe with a yield strength not less than 42,000 psi | 10 |
| 7305.39.90 | - - - Other | 10 |
| 7305.90.00 | - Other | 5 |
| 73.06 | Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel | |
| - Line pipe of a kind used for oil or gas pipelines: | ||
| 7306.11 | - - Welded, of stainless steel: | |
| 7306.11.10 | - - - Longitudinally electric resistance welded (ERW) | 5 |
| 7306.11.90 | - - - Other | 5 |
| 7306.19 | - - Other: | |
| 7306.19.10 | - - - Longitudinally electric resistance welded (ERW) | 5 |
| 7306.19.20 | - - - Spiral or helical submerged arc welded | 5 |
| 7306.19.90 | - - - Other | 5 |
| - Casing and tubing of a kind used in drilling for oil or gas: | ||
| 7306.21.00 | - - Welded, of stainless steel | 5 |
| 7306.29.00 | - - Other | 5 |
| 7306.30 | - Other, welded, of circular cross-section, of iron or non-alloy steel: | |
| - - Boiler tubes: | ||
| 7306.30.11 | - - - With an external diameter less than 12.5 mm | 10 |
| 7306.30.19 | - - - Other | 10 |
| - - Copper-plated, fluororesin-coated or zinc-chromated steel tubes with an external diameter not exceeding 15 mm: | ||
| 7306.30.21 | - - - With an external diameter less than 12.5 mm | 10 |
| 7306.30.29 | - - - Other | 10 |
| 7306.30.30 | - - Pipe of a kind used to make sheath pipe (heater pipe) for heating elements of electric flat irons or rice cookers, with an external diameter not exceeding 12 mm | 10 |
| - - High pressure pipes having a yield point of not less than 42,000 psi: | ||
| 7306.30.41 | - - - With an external diameter less than 12.5 mm | 5 |
| 7306.30.49 | - - - Other | 5 |
| - - Other: | ||
| 7306.30.91 | - - - With an internal diameter of 12.5 mm or more, an external diameter less than 140 mm and containing by weight less than 0.45% of carbon | 10 |
| 7306.30.92 | - - - With an internal diameter less than 12.5 mm | 10 |
| 7306.30.99 | - - - Other | 10 |
| 7306.40 | - Other, welded, of circular cross-section, of stainless steel: | |
| - - Boiler tubes: | ||
| 7306.40.11 | - - - With an external diameter not exceeding 12.5 mm | 7 |
| 7306.40.19 | - - - Other | 7 |
| 7306.40.20 | - - Stainless steel pipes and tubes, with an external diameter exceeding 105 mm | 7 |
| 7306.40.30 | - - Pipes and tubes containing by weight at least 30% of nickel, with an external diameter not exceeding 10 mm | 7 |
| 7306.40.90 | - - Other | 0 |
| 7306.50 | - Other, welded, of circular cross-section, of other alloy steel: | |
| - - Boiler tubes: | ||
| 7306.50.11 | - - - With an external diameter less than 12.5 mm | 5 |
| 7306.50.19 | - - - Other | 5 |
| - - Other: | ||
| 7306.50.91 | - - - With an external diameter less than 12.5 mm | 5 |
| 7306.50.99 | - - - Other | 5 |
| - Other, welded, of non-circular cross-section: | ||
| 7306.61 | - - Of square or rectangular cross-section: | |
| 7306.61.10 | - - - With an external diagonal cross-section less than 12.5 mm | 5 |
| 7306.61.90 | - - - Other | 5 |
| 7306.69 | - - Of other non-circular cross-section: | |
| 7306.69.10 | - - - With an external diagonal cross-section less than 12.5 mm | 5 |
| 7306.69.90 | - - - Other | 5 |
| 7306.90 | - Other: | |
| - - Copper brazed pipes and tubes: | ||
| 7306.90.11 | - - - With an external diagonal cross-section less than 12.5 mm | 10 |
| 7306.90.19 | - - - Other | 10 |
| - - Other: | ||
| 7306.90.91 | - - - High pressure pipes with a yield strength not less than 42,000 psi, with an internal diameter of less than 12.5 mm | 10 |
| 7306.90.94 | - - - Other high pressure pipes, with an external diameter of less than 12.5 mm | 10 |
| 7306.90.95 | - - - Other high pressure pipes, with an external diameter of 12.5 mm or more | 10 |
| 7306.90.96 | - - - Other, with an external diagonal cross-section less than 12.5 mm | 10 |
| 7306.90.97 | - - - Other, with an internal diameter more than 12.5 mm, an external diameter less than 140 mm and containing by weight less than 0.45% of carbon | 10 |
| 7306.90.99 | - - - Other | 10 |
| 73.07 | Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel | |
| - Cast fittings: | ||
| 7307.11 | - - Of non-malleable cast iron: | |
| 7307.11.10 | - - - Hubless tube or pipe fittings | 5 |
| 7307.11.90 | - - - Other | 5 |
| 7307.19.00 | - - Other | 5 |
| - Other, of stainless steel: | ||
| 7307.21 | - - Flanges: | |
| 7307.21.10 | - - - Having an internal diameter of less than 15 cm | 5 |
| 7307.21.90 | - - - Other | 5 |
| 7307.22 | - - Threaded elbows, bends and sleeves: | |
| 7307.22.10 | - - - Having an internal diameter of less than 15 cm | 10 |
| 7307.22.90 | - - - Other | 10 |
| 7307.23 | - - Butt welding fittings: | |
| 7307.23.10 | - - - Having an internal diameter of less than 15 cm | 5 |
| 7307.23.90 | - - - Other | 5 |
| 7307.29 | - - Other: | |
| 7307.29.10 | - - - Having an internal diameter of less than 15 cm | 5 |
| 7307.29.90 | - - - Other | 5 |
| - Other: | ||
| 7307.91 | - - Flanges: | |
| 7307.91.10 | - - - Having an internal diameter of less than 15 cm | 5 |
| 7307.91.90 | - - - Other | 5 |
| 7307.92 | - - Threaded elbows, bends and sleeves: | |
| 7307.92.10 | - - - Having an internal diameter of less than 15 cm | 10 |
| 7307.92.90 | - - - Other | 10 |
| 7307.93 | - - Butt welding fittings: | |
| 7307.93.10 | - - - Having an internal diameter of less than 15 cm | 5 |
| 7307.93.90 | - - - Other | 5 |
| 7307.99 | - - Other: | |
| 7307.99.10 | - - - Having an internal diameter of less than 15 cm | 5 |
| 7307.99.90 | - - - Other | 5 |
| 73.08 | Structures (excluding prefabricated buildings of heading 94.06) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel | |
| 7308.10 | - Bridges and bridge-sections: | |
| 7308.10.10 | - - Prefabricated modular type joined by shear connectors | 0 |
| 7308.10.90 | - - Other | 3 |
| 7308.20 | - Towers and lattice masts: | |
| - - Towers: | ||
| 7308.20.11 | - - - Prefabricated modular type joined by shear connectors | 3 |
| 7308.20.19 | - - - Other | 3 |
| - - Lattice masts: | ||
| 7308.20.21 | - - - Prefabricated modular type joined by shear connectors | 5 |
| 7308.20.29 | - - - Other | 5 |
| 7308.30 | - Doors, windows and their frames and thresholds for doors: | |
| 7308.30.10 | - - Doors, of a thickness of 6 mm or more but not exceeding 8 mm | 12 |
| 7308.30.90 | - - Other | 12 |
| 7308.40 | - Equipment for scaffolding, shuttering, propping or pit-propping: | |
| 7308.40.10 | - - Prefabricated modular type joined by shear connectors | 3 |
| 7308.40.90 | - - Other | 3 |
| 7308.90 | - Other: | |
| 7308.90.20 | - - Prefabricated modular type joined by shear connectors | 10 |
| 7308.90.40 | - - Corrugated and curved galvanised plates or sheets prepared for use in conduits, culverts or tunnels | 10 |
| 7308.90.50 | - - Rails for ships | 10 |
| 7308.90.60 | - - Perforated cable trays | 10 |
| - - Other: | ||
| 7308.90.92 | - - - Guardrails | 10 |
| 7308.90.99 | - - - Other | 10 |
| 73.09 | Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment | |
| - Of a kind used for the conveyance or packing of goods: | ||
| 7309.00.11 | - - Lined or heat-insulated | 5 |
| 7309.00.19 | - - Other | 5 |
| - Other: | ||
| 7309.00.91 | - - Lined or heat-insulated | 5 |
| 7309.00.99 | - - Other | 5 |
| 73.10 | Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment | |
| 7310.10 | - Of a capacity of 50 l or more: | |
| 7310.10.10 | - - Of tinplate | 12 |
| - - Other: | ||
| 7310.10.91 | - - - Casting, forging or stamping, in the rough state | 12 |
| 7310.10.99 | - - - Other | 12 |
| - Of a capacity of less than 50 l: | ||
| 7310.21 | - - Cans which are to be closed by soldering or crimping: | |
| - - - Of a capacity of less than 1 l: | ||
| 7310.21.11 | - - - - Of tinplate | 15 |
| 7310.21.19 | - - - - Other | 15 |
| - - - Other: | ||
| 7310.21.91 | - - - - Of tinplate | 10 |
| 7310.21.99 | - - - - Other | 12 |
| 7310.29 | - - Other: | |
| - - - Of a capacity of less than 1 l: | ||
| 7310.29.11 | - - - - Of tinplate | 15 |
| 7310.29.19 | - - - - Other | 15 |
| - - - Other: | ||
| 7310.29.91 | - - - - Of tinplate | 10 |
| 7310.29.92 | - - - - Other casting, forging or stamping, in the rough state | 10 |
| 7310.29.99 | - - - - Other | 10 |
| 73.11 | Containers for compressed or liquefied gas, of iron or steel | |
| - Seamless steel cylinders: | ||
| 7311.00.21 | - - Of a capacity of 30 l or more, but less than 110 l, for Automotive Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG) | 5 |
| 7311.00.22 | - - Of a capacity of 110 l or more, for Automotive Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG) | 0 |
| 7311.00.23 | - - Of a capacity of less than 30 l, for Liquefied Petroleum Gas (LPG) | 20 |
| 7311.00.24 | - - Of a capacity of 30 l or more, but less than 110 l, for Liquefied Petroleum Gas (LPG) | 5 |
| 7311.00.25 | - - Other, for Liquefied Petroleum Gas (LPG) | 0 |
| 7311.00.26 | - - Other, of a capacity of less than 30 l | 20 |
| 7311.00.27 | - - Other, of a capacity of 30 l or more, but less than 110 l | 5 |
| 7311.00.29 | - - Other | 0 |
| - Other: | ||
| 7311.00.91 | - - Of a capacity not exceeding 7.3 l | 17 |
| 7311.00.92 | - - Of a capacity more than 7.3 l but less than 30 l | 17 |
| 7311.00.94 | - - Of a capacity of 30 l or more, but less than 110 l | 5 |
| 7311.00.99 | - - Other | 0 |
| 73.12 | Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated | |
| 7312.10 | - Stranded wire, ropes and cables: | |
| 7312.10.10 | - - Locked coils, flattened strands and non-rotating wire ropes | 5 |
| 7312.10.20 | - - Plated or coated with brass and of a diameter not exceeding 3 mm | 5 |
| 7312.10.30 | - - Plated or coated with aluminium | 5 |
| - - Other: | ||
| 7312.10.91 | - - - Stranded steel wire for prestressing concrete | 3 |
| 7312.10.99 | - - - Other | 5 |
| 7312.90.00 | - Other | 5 |
| 7313.00.00 | Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel | 30 |
| 73.14 | Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel | |
| - Woven cloth: | ||
| 7314.12.00 | - - Endless bands for machinery, of stainless steel | 15 |
| 7314.14.00 | - - Other woven cloth, of stainless steel | 15 |
| 7314.19 | - - Other: | |
| 7314.19.10 | - - - Endless bands for machinery other than of stainless steel | 15 |
| 7314.19.90 | - - - Other | 15 |
| 7314.20.00 | - Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more | 15 |
| - Other grill, netting and fencing, welded at the intersection: | ||
| 7314.31.00 | - - Plated or coated with zinc | 20 |
| 7314.39.00 | - - Other | 20 |
| - Other cloth, grill, netting and fencing: | ||
| 7314.41.00 | - - Plated or coated with zinc | 30 |
| 7314.42.00 | - - Coated with plastics | 30 |
| 7314.49.00 | - - Other | 30 |
| 7314.50.00 | - Expanded metal | 20 |
| 73.15 | Chain and parts thereof, of iron or steel | |
| - Articulated link chain and parts thereof: | ||
| 7315.11 | - - Roller chain: | |
| 7315.11.10 | - - - Bicycle or motorcycle chain | 35 |
| - - - Other: | ||
| 7315.11.91 | - - - - Transmission type, of a pitch length of not less than 6 mm and not more than 32 mm | 3 |
| 7315.11.99 | - - - - Other | 3 |
| 7315.12 | - - Other chain: | |
| 7315.12.10 | - - - Bicycle or motorcycle chain | 3 |
| 7315.12.90 | - - - Other | 3 |
| 7315.19 | - - Parts: | |
| 7315.19.10 | - - - Of bicycle or motorcycle chain | 35 |
| 7315.19.90 | - - - Other | 3 |
| 7315.20.00 | - Skid chain | 3 |
| - Other chain: | ||
| 7315.81.00 | - - Stud-link | 3 |
| 7315.82.00 | - - Other, welded link | 3 |
| 7315.89 | - - Other: | |
| 7315.89.10 | - - - Bicycle or motorcycle chain | 30 |
| 7315.89.90 | - - - Other | 3 |
| 7315.90 | - Other parts: | |
| 7315.90.20 | - - Of bicycle or motorcycle chain | 30 |
| 7315.90.90 | - - Other | 3 |
| 7316.00.00 | Anchors, grapnels and parts thereof, of iron or steel | 3 |
| 73.17 | Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 83.05) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper | |
| 7317.00.10 | - Wire nails | 20 |
| 7317.00.20 | - Staples | 20 |
| 7317.00.30 | - Dog spikes for rail sleepers; gang nails | 20 |
| 7317.00.90 | - Other | 20 |
| 73.18 | Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of iron or steel | |
| - Threaded articles: | ||
| 7318.11.00 | - - Coach screws | 5 |
| 7318.12 | - - Other wood screws: | |
| 7318.12.10 | - - - Having a shank of an external diameter not exceeding 16 mm | 12 |
| 7318.12.90 | - - - Other | 12 |
| 7318.13.00 | - - Screw hooks and screw rings | 10 |
| 7318.14 | - - Self-tapping screws: | |
| 7318.14.10 | - - - Having a shank of an external diameter not exceeding 16 mm | 12 |
| 7318.14.90 | - - - Other | 12 |
| 7318.15 | - - Other screws and bolts, whether or not with their nuts or washers: | |
| 7318.15.10 | - - - Having a shank of an external diameter not exceeding 16 mm | 12 |
| 7318.15.90 | - - - Other | 12 |
| 7318.16 | - - Nuts: | |
| 7318.16.10 | - - - For bolts having a shank of an external diameter not exceeding 16 mm | 12 |
| 7318.16.90 | - - - Other | 12 |
| 7318.19 | - - Other: | |
| 7318.19.10 | - - - Having a shank of an external diameter not exceeding 16 mm | 12 |
| 7318.19.90 | - - - Other | 12 |
| - Non-threaded articles: | ||
| 7318.21.00 | - - Spring washers and other lock washers | 12 |
| 7318.22.00 | - - Other washers | 12 |
| 7318.23 | - - Rivets: | |
| 7318.23.10 | - - - Having an external diameter not exceeding 16 mm | 12 |
| 7318.23.90 | - - - Other | 12 |
| 7318.24.00 | - - Cotters and cotter-pins | 12 |
| 7318.29 | - - Other: | |
| 7318.29.10 | - - - Having a shank of an external diameter not exceeding 16 mm | 12 |
| 7318.29.90 | - - - Other | 12 |
| 73.19 | Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included | |
| 7319.40 | - Safety pins and other pins: | |
| 7319.40.10 | - - Safety pins | 30 |
| 7319.40.20 | - - Other pins | 30 |
| 7319.90 | - Other: | |
| 7319.90.10 | - - Sewing, darning or embroidery needles | 30 |
| 7319.90.90 | - - Other | 30 |
| 73.20 | Springs and leaves for springs, of iron or steel | |
| 7320.10 | - Leaf-springs and leaves therefor: | |
| - - Suitable for use on motor vehicles or machinery of heading 84.29 or 84.30: | ||
| 7320.10.11 | - - - Suitable for use on motor vehicles of heading 87.02, 87.03 or 87.04 | 10 |
| 7320.10.12 | - - - Suitable for use on other motor vehicles | 3 |
| 7320.10.19 | - - - Other | 3 |
| 7320.10.90 | - - Other | 3 |
| 7320.20 | - Helical springs: | |
| - - Suitable for use on motor vehicles or machinery of heading 84.29 or 84.30: | ||
| 7320.20.11 | - - - For motor vehicles | 3 |
| 7320.20.12 | - - - For earth-moving machinery | 3 |
| 7320.20.19 | - - - Other | 3 |
| 7320.20.90 | - - Other | 3 |
| 7320.90 | - Other: | |
| 7320.90.10 | - - Suitable for use on motor vehicles | 3 |
| 7320.90.90 | - - Other | 3 |
| 73.21 | Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel | |
| - Cooking appliances and plate warmers: | ||
| 7321.11.00 | - - For gas fuel or for both gas and other fuels | 15 |
| 7321.12.00 | - - For liquid fuel | 20 |
| 7321.19 | - - Other, including appliances for solid fuel: | |
| 7321.19.10 | - - - For solid fuel | 20 |
| 7321.19.90 | - - - Other | 20 |
| - Other appliances: | ||
| 7321.81.00 | - - For gas fuel or for both gas and other fuels | 15 |
| 7321.82.00 | - - For liquid fuel | 25 |
| 7321.89.00 | - - Other, including appliances for solid fuel | 25 |
| 7321.90 | - Parts: | |
| 7321.90.10 | - - Of kerosene stoves | 10 |
| - - Of cooking appliances and plate warmers using gaseous fuel: | ||
| 7321.90.21 | - - - Burner; components made by stamping or pressing processes | 10 |
| 7321.90.29 | - - - Other | 10 |
| 7321.90.90 | - - Other | 10 |
| 73.22 | Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor- driven fan or blower, and parts thereof, of iron or steel | |
| - Radiators and parts thereof: | ||
| 7322.11.00 | - - Of cast iron | 27 |
| 7322.19.00 | - - Other | 30 |
| 7322.90.00 | - Other | 20 |
| 73.23 | Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel | |
| 7323.10.00 | - Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like | 25 |
| - Other: | ||
| 7323.91 | - - Of cast iron, not enamelled: | |
| 7323.91.10 | - - - Kitchenware | 30 |
| 7323.91.20 | - - - Ashtrays | 30 |
| 7323.91.90 | - - - Other | 30 |
| 7323.92.00 | - - Of cast iron, enamelled | 30 |
| 7323.93 | - - Of stainless steel: | |
| 7323.93.10 | - - - Kitchenware | 30 |
| 7323.93.20 | - - - Ashtrays | 30 |
| 7323.93.90 | - - - Other | 30 |
| 7323.94.00 | - - Of iron (other than cast iron) or steel, enamelled | 30 |
| 7323.99 | - - Other: | |
| 7323.99.10 | - - - Kitchenware | 20 |
| 7323.99.20 | - - - Ashtrays | 20 |
| 7323.99.90 | - - - Other | 20 |
| 73.24 | Sanitary ware and parts thereof, of iron or steel | |
| 7324.10 | - Sinks and wash basins, of stainless steel: | |
| 7324.10.10 | - - Kitchen sinks | 20 |
| 7324.10.90 | - - Other | 20 |
| - Baths: | ||
| 7324.21 | - - Of cast iron, whether or not enamelled: | |
| 7324.21.10 | - - - Bathtubs having rectangular or oblong interior shape | 35 |
| 7324.21.90 | - - - Other | 35 |
| 7324.29 | - - Other: | |
| 7324.29.10 | - - - Bathtubs having rectangular or oblong interior shape | 35 |
| 7324.29.90 | - - - Other | 35 |
| 7324.90 | - Other, including parts: | |
| 7324.90.10 | - - Flushing water closets or urinals (fixed type) | 20 |
| - - Other: | ||
| 7324.90.91 | - - - Parts of kitchen sinks or bathtubs | 20 |
| 7324.90.93 | - - - Parts of flushing water closets or urinals (fixed type) | 20 |
| 7324.90.99 | - - - Other | 20 |
| 73.25 | Other cast articles of iron or steel | |
| 7325.10 | - Of non-malleable cast iron: | |
| 7325.10.20 | - - Manhole covers, gratings and frames therefor | 20 |
| 7325.10.30 | - - Spouts and cups for latex collection | 15 |
| 7325.10.90 | - - Other | 15 |
| - Other: | ||
| 7325.91.00 | - - Grinding balls and similar articles for mills | 20 |
| 7325.99 | - - Other: | |
| 7325.99.20 | - - - Manhole covers, gratings and frames therefor | 20 |
| 7325.99.90 | - - - Other | 20 |
| 73.26 | Other articles of iron or steel | |
| - Forged or stamped, but not further worked: | ||
| 7326.11.00 | - - Grinding balls and similar articles for mills | 20 |
| 7326.19.00 | - - Other | 10 |
| 7326.20 | - Articles of iron or steel wire: | |
| 7326.20.50 | - - Poultry cages and the like | 20 |
| 7326.20.60 | - - Rat traps | 15 |
| 7326.20.70 | - - Wire mesh curtain and blinds | 15 |
| 7326.20.90 | - - Other | 15 |
| 7326.90 | - Other: | |
| 7326.90.10 | - - Ships' rudders | 5 |
| 7326.90.20 | - - Spouts and cups for latex collection | 10 |
| 7326.90.30 | - - Stainless steel clamp assemblies with rubber sleeves of a kind used for hubless cast iron pipes and pipe fittings | 15 |
| 7326.90.60 | - - Bunsen burners | 15 |
| 7326.90.70 | - - Horseshoes; riding boot spurs | 15 |
| - - Other: | ||
| 7326.90.91 | - - - Cigarette cases and boxes | 15 |
| 7326.90.99 | - - - Other | 10 |
Digitised for reference; formatting may differ slightly from the original — verify against the attached original file or the official gazette. Vietnamese legal text.